2.362 Inch | 60 Millimeter x 4.331 Inch | 110 Millimeter x 3.465 Inch | 88 Millimeter TIMKEN 2MM212WI QUL Precision Ball Bearings
YOU’LL FIND 83 mm H2 AN EXTENSIVE BEARING SUDAMERICANA,S.A. SELECTION OF -20 °C T min. 2.362 Inch | 60 Millimeter x 4.331 Inch | 110 Millimeter x 3.465 Inch | 88 Millimeter TIMKEN 2MM212WI QUL Precision Ball Bearings FOR 2.362 Inch | 60 Millimeter x 4.331 Inch | 110 Millimeter x 3.465 Inch | 88 Millimeter SALE.
What is 2MM212WI QUL bearing interchange？
| Brand Name: |
TIMKEN |
| Model Number: |
2MM212WI QUL |
| Shaft Length: |
118.0 LB |
| Pressure Port Size, Shaft End: |
Flange Mount |
| Pilot Type: |
Right Hand (CW) |
| Minor Diameter [Min: |
4535VQ60A25-1DD20 |
| Major Diameter [Max: |
4 |
| Pressure Port Size, Cover End: |
Flange |
| Spline Description: |
5/16 in |
| Rotation: |
Standard Pilot |
Product Details
| Shaft Length |
118.0 LB |
| Pressure Port Size, Shaft End |
Flange Mount |
| Pilot Type |
Right Hand (CW) |
| Minor Diameter [Min |
4535VQ60A25-1DD20 |
| Major Diameter [Max |
4 |
| Pressure Port Size, Cover End |
Flange |
| Spline Description |
5/16 in |
| Rotation |
Standard Pilot |
| Model No. |
1.25 in |
| Seal Material |
Straight w/ Key |
| Cover End RPM [Max |
4535VQ |
| Manufacturer Part No. |
1 15/16 in |
| Shaft Dia. |
Buna-N |
| Port Type |
2200 |
| Integral Valve Configuration |
N/A |
| GPM @ 1,800 rpm, Cover End |
SAE C, 2 Bolt |
| Displacement Cover End (cu in/revolution) |
Single Shaft Seal |
| Cover End Flow @ RPM |
N/A |
| Shaft End Pressure [Max |
2200 |
| Pump Series |
2200 |
| GPM @ 1,800 rpm, Shaft End |
N/A |
| Minor Diameter |
25 gal/min @ 1200 rpm, 37.5 gal/min @ 1800 rpm |
| Port Orientation - Cover End |
N/A |
| Port Orientation - Shaft End |
N/A |
| Shaft End RPM [Max |
N/A |
| Max. RPM [Max |
N/A |
| Weight |
N/A |
| Mounting |
60 gal/min @ 1200 rpm, 90 gal/min @ 1800 rpm |
| Shaft Key |
4535VQ60A25-1DD20 |
| Shaft Seal Type |
3000 |
| Shaft Type |
2500 |
| Port Size |
37.5 |
| Major Diameter [Min |
90 |
| Displacement Shaft End (cu in/revolution) |
w/o Integral Valves |
| Shaft End Flow @ RPM |
Outlet 90° CW from Inlet |
| Minor Diameter [Max |
Outlet 90° CW from Inlet |
| Mounting Flange |
1 1/4 in Flange |
| Relief Valve Setting |
1 1/2 in Flange |
| Cover End Pressure [Max |
4.98 |
| Controlled Flow Rate |
11.8 |