1.575 Inch | 40.005 Millimeter x 0 Inch | 0 Millimeter x 0.908 Inch | 23.063 Millimeter TIMKEN 44157X-2 Tapered Roller Bearings
1.575 Inch | 40.005 Millimeter x 0 Inch | 0 Millimeter x 0.908 Inch | 23.063 Millimeter TIMKEN 44157X-2 Tapered Roller Bearings Needs Analysis , Timken Bearing Manufacturing Service . BEARING SUDAMERICANA,S.A. Get Your 1.575 Inch | 40.005 Millimeter x 0 Inch | 0 Millimeter x 0.908 Inch | 23.063 Millimeter 52.5 kN C Free.
What is 44157X-2 bearing interchange？
| Brand Name: |
TIMKEN |
| Model Number: |
44157X-2 |
| Manufacturer Part No.: |
118.0 LB |
| Minor Diameter: |
Flange Mount |
| Shaft Type: |
Left Hand (CCW) |
| Displacement Shaft End (cu in/revolution): |
11.8 |
| Pilot Type: |
4 |
| Shaft End Flow @ RPM: |
Flange |
| Cover End Flow @ RPM: |
N/A |
| Cover End Pressure [Max: |
Standard Pilot |
Product Details
| Manufacturer Part No. |
118.0 LB |
| Minor Diameter |
Flange Mount |
| Shaft Type |
Left Hand (CCW) |
| Displacement Shaft End (cu in/revolution) |
11.8 |
| Pilot Type |
4 |
| Shaft End Flow @ RPM |
Flange |
| Cover End Flow @ RPM |
N/A |
| Cover End Pressure [Max |
Standard Pilot |
| Pump Series |
1.25 in |
| Seal Material |
14 Tooth Splined |
| Minor Diameter [Max |
4535VQ |
| GPM @ 1,800 rpm, Cover End |
1 15/16 in |
| Major Diameter [Min |
Double |
| Rotation |
Buna-N |
| Shaft End Pressure [Max |
2200 |
| Spline Description |
1.04 in |
| Port Orientation - Cover End |
SAE C, 2 Bolt |
| Shaft End RPM [Max |
Single Shaft Seal |
| Port Orientation - Shaft End |
12/24 |
| Pressure Port Size, Cover End |
2200 |
| Minor Diameter [Min |
2200 |
| Shaft Length |
N/A |
| Model No. |
38 gal/min @ 1200 rpm, 57 gal/min @ 1800 rpm |
| Displacement Cover End (cu in/revolution) |
1.248 in |
| Major Diameter [Max |
1.247 in |
| Integral Valve Configuration |
N/A |
| Mounting Flange |
N/A |
| Relief Valve Setting |
N/A |
| Shaft Key |
60 gal/min @ 1200 rpm, 90 gal/min @ 1800 rpm |
| Cover End RPM [Max |
4535VQ60A38-11AA20-LH |
| Weight |
3000 |
| Shaft Seal Type |
2500 |
| Port Size |
57 |
| Max. RPM [Max |
90 |
| Port Type |
w/o Integral Valves |
| GPM @ 1,800 rpm, Shaft End |
Outlet Opposite Inlet |
| Shaft Dia. |
Outlet Opposite Inlet |
| Pressure Port Size, Shaft End |
1 1/4 in Flange |
| Mounting |
1 1/2 in Flange |
| Controlled Flow Rate |
7.4 |