0 Inch | 0 Millimeter x 6.299 Inch | 160 Millimeter x 1.26 Inch | 32 Millimeter TIMKEN JHM720210-2 Tapered Roller Bearings
Timken Bearing are a few brands BEARING SUDAMERICANA,S.A. you 0 Inch | 0 Millimeter x 6.299 Inch | 160 Millimeter x 1.26 Inch | 32 Millimeter will find in our inventory. Find 0 Inch | 0 Millimeter x 6.299 Inch | 160 Millimeter x 1.26 Inch | 32 Millimeter TIMKEN JHM720210-2 Tapered Roller Bearings to see what's in stock!
What is JHM720210-2 bearing interchange？
| Brand Name: |
TIMKEN |
| Model Number: |
JHM720210-2 |
| Relief Valve Setting: |
101.0 LB |
| Shaft Seal Type: |
Flange Mount |
| Shaft Dia.: |
Right Hand (CW) |
| Port Orientation - Cover End: |
4525VQ60A21-11AA20 |
| Pressure Port Size, Shaft End: |
3 1/2 |
| Shaft End Flow @ RPM: |
Flange |
| Cover End Pressure [Max: |
N/A |
| Shaft Key: |
Standard Pilot |
Product Details
| Relief Valve Setting |
101.0 LB |
| Shaft Seal Type |
Flange Mount |
| Shaft Dia. |
Right Hand (CW) |
| Port Orientation - Cover End |
4525VQ60A21-11AA20 |
| Pressure Port Size, Shaft End |
3 1/2 |
| Shaft End Flow @ RPM |
Flange |
| Cover End Pressure [Max |
N/A |
| Shaft Key |
Standard Pilot |
| Seal Material |
1.25 in |
| Cover End RPM [Max |
14 Tooth Splined |
| Pump Series |
4525VQ |
| Rotation |
1 15/16 in |
| Shaft Length |
Buna-N |
| Port Size |
2200 |
| Minor Diameter |
1.04 in |
| Model No. |
SAE C, 2 Bolt |
| Major Diameter [Min |
Single Shaft Seal |
| Integral Valve Configuration |
12/24 |
| Pilot Type |
2200 |
| GPM @ 1,800 rpm, Cover End |
2200 |
| Mounting |
N/A |
| Shaft Type |
21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm |
| Port Orientation - Shaft End |
1.248 in |
| Shaft End Pressure [Max |
1.247 in |
| Displacement Shaft End (cu in/revolution) |
N/A |
| Mounting Flange |
N/A |
| Minor Diameter [Min |
N/A |
| Pressure Port Size, Cover End |
60 gal/min @ 1200 rpm, 90 gal/min @ 1800 rpm |
| GPM @ 1,800 rpm, Shaft End |
4525VQ60A21-11AA20 |
| Port Type |
3000 |
| Cover End Flow @ RPM |
2500 |
| Max. RPM [Max |
31.5 |
| Manufacturer Part No. |
90 |
| Weight |
w/o Integral Valves |
| Shaft End RPM [Max |
Outlet 135° CCW from Inlet |
| Major Diameter [Max |
Outlet Opposite Inlet |
| Minor Diameter [Max |
1 in Flange |
| Displacement Cover End (cu in/revolution) |
1 1/2 in Flange |
| Controlled Flow Rate |
4.12 |
| Spline Description |
11.8 |