6.102 Inch | 155 Millimeter x 3.874 Inch | 98.4 Millimeter x 7.126 Inch | 181 Millimeter TIMKEN LSM155BRHSATL Pillow Block Bearings
Various Timken Bearing types and sizes 6.102 Inch | 155 Millimeter x 3.874 Inch | 98.4 Millimeter x 7.126 Inch | 181 Millimeter to 34 mm B accommodate your 6.102 Inch | 155 Millimeter x 3.874 Inch | 98.4 Millimeter x 7.126 Inch | 181 Millimeter TIMKEN LSM155BRHSATL Pillow Block Bearings BEARING SUDAMERICANA,S.A. requirements.
What is LSM155BRHSATL bearing cross reference？
| Brand Name: |
TIMKEN |
| Model Number: |
LSM155BRHSATL |
| Mounting: |
45.0 LB |
| Major Diameter [Max: |
Flange Mount |
| Spline Description: |
Right Hand (CW) |
| Port Type: |
2520VQP21A11-11BB3F-20 |
| Pump Series: |
2 1/2 |
| Shaft End Pressure [Max: |
Flange |
| Minor Diameter [Max: |
N/A |
| Port Orientation - Cover End: |
Standard Pilot |
Product Details
| Mounting |
45.0 LB |
| Major Diameter [Max |
Flange Mount |
| Spline Description |
Right Hand (CW) |
| Port Type |
2520VQP21A11-11BB3F-20 |
| Pump Series |
2 1/2 |
| Shaft End Pressure [Max |
Flange |
| Minor Diameter [Max |
N/A |
| Port Orientation - Cover End |
Standard Pilot |
| Major Diameter [Min |
0.875 in |
| Displacement Shaft End (cu in/revolution) |
13 Tooth Splined |
| Pilot Type |
2520VQ |
| Minor Diameter |
1 3/8 in |
| Shaft Type |
Buna-N |
| Port Size |
2500 |
| Displacement Cover End (cu in/revolution) |
0.715 in |
| GPM @ 1,800 rpm, Cover End |
SAE B, 2 Bolt |
| Shaft End RPM [Max |
Single Shaft Seal |
| Pressure Port Size, Cover End |
16/32 |
| Port Orientation - Shaft End |
2700 |
| Cover End Flow @ RPM |
2500 |
| GPM @ 1,800 rpm, Shaft End |
3 gal/min |
| Shaft End Flow @ RPM |
11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm |
| Rotation |
0.873 in |
| Controlled Flow Rate |
0.872 in |
| Cover End RPM [Max |
N/A |
| Shaft Dia. |
N/A |
| Weight |
1500 psi |
| Shaft Key |
21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm |
| Model No. |
2520VQP21A11-11BB3F-20 |
| Cover End Pressure [Max |
3000 |
| Mounting Flange |
3000 |
| Relief Valve Setting |
16.5 |
| Integral Valve Configuration |
31.5 |
| Shaft Length |
Priority Valve & Relief |
| Shaft Seal Type |
Outlet 45° CCW from Inlet |
| Minor Diameter [Min |
Outlet 90° CCW from Inlet |
| Max. RPM [Max |
3/4 in Flange |
| Seal Material |
1 in Flange |
| Manufacturer Part No. |
2.22 |
| Pressure Port Size, Shaft End |
4.12 |