| Seal Material | 76.0 LB |
| Mounting Flange | Flange Mount |
| Shaft End Flow @ RPM | Left Hand (CCW) |
| Port Size | 3525VQ30A12-11CC20-LH |
| Relief Valve Setting | 3 |
| Port Type | Flange |
| Minor Diameter | N/A |
| GPM @ 1,800 rpm, Cover End | Standard Pilot |
| Cover End RPM [Max | 1.25 in |
| Shaft Key | 14 Tooth Splined |
| Displacement Shaft End (cu in/revolution) | 3525VQ |
| Cover End Flow @ RPM | 1 15/16 in |
| GPM @ 1,800 rpm, Shaft End | Buna-N |
| Manufacturer Part No. | 2500 |
| Port Orientation - Cover End | 1.04 in |
| Displacement Cover End (cu in/revolution) | SAE C, 2 Bolt |
| Pump Series | Single Shaft Seal |
| Pressure Port Size, Cover End | 12/24 |
| Cover End Pressure [Max | 2500 |
| Minor Diameter [Max | 2500 |
| Minor Diameter [Min | N/A |
| Shaft Length | 12 gal/min @ 1200 rpm, 18 gal/min @ 1800 rpm |
| Max. RPM [Max | 1.248 in |
| Pilot Type | 1.247 in |
| Controlled Flow Rate | N/A |
| Rotation | N/A |
| Major Diameter [Min | N/A |
| Model No. | 30 gal/min @ 1200 rpm, 45 gal/min @ 1800 rpm |
| Shaft Type | 3525VQ30A12-11CC20-LH |
| Major Diameter [Max | 3000 |
| Mounting | 3000 |
| Shaft Seal Type | 18 |
| Integral Valve Configuration | 45 |
| Pressure Port Size, Shaft End | w/o Integral Valves |
| Shaft End Pressure [Max | Outlet 45° CW from Inlet |
| Spline Description | Outlet Inline w/Inlet |
| Shaft End RPM [Max | 1 in Flange |
| Weight | 1 1/4 in Flange |
| Shaft Dia. | 2.45 |
| Port Orientation - Shaft End | 5.96 |
