| Shaft Length | 76.0 LB |
| Manufacturer Part No. | Flange Mount |
| Shaft End Pressure [Max | Left Hand (CCW) |
| Minor Diameter [Max | 3525VQ30A21-11DC20-LH |
| Spline Description | 3 |
| Minor Diameter [Min | Flange |
| Shaft Dia. | N/A |
| Displacement Cover End (cu in/revolution) | Standard Pilot |
| Minor Diameter | 1.25 in |
| Shaft Key | 14 Tooth Splined |
| Pressure Port Size, Cover End | 3525VQ |
| Relief Valve Setting | 1.9375 in |
| Pump Series | Double |
| Port Orientation - Cover End | Buna-N |
| Major Diameter [Min | 2500 |
| Pilot Type | 1.04 in |
| Shaft Type | SAE C, 2 Bolt |
| Max. RPM [Max | Single Shaft Seal |
| Pressure Port Size, Shaft End | 12/24 |
| Shaft End RPM [Max | 2500 |
| Displacement Shaft End (cu in/revolution) | 6 |
| Integral Valve Configuration | N/A |
| Weight | 21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm |
| Controlled Flow Rate | 1.248 in |
| Mounting | 1.247 in |
| Cover End Flow @ RPM | N/A |
| Seal Material | N/A |
| Shaft End Flow @ RPM | N/A |
| Model No. | 30 gal/min @ 1200 rpm, 45 gal/min @ 1800 rpm |
| Port Orientation - Shaft End | 3525VQ30A21-11DC20-LH |
| Port Type | 3000 |
| Cover End RPM [Max | 3000 |
| GPM @ 1,800 rpm, Cover End | 31.5 |
| Mounting Flange | 45 |
| Rotation | w/o Integral Valves |
| Port Size | Outlet 45° CW from Inlet |
| GPM @ 1,800 rpm, Shaft End | Outlet 90° CW from Inlet |
| Cover End Pressure [Max | 1 in Flange |
| Major Diameter [Max | 1 1/4 in Flange |
| Shaft Seal Type | 4.1 |
