| Weight | 45.0 LB |
| Spline Description | Flange Mount |
| Cover End RPM [Max | Left Hand (CCW) |
| Pressure Port Size, Cover End | 2520VQ17A14-11BC20-LH |
| Major Diameter [Max | 2.5 |
| Shaft Type | Flange |
| Port Orientation - Cover End | N/A |
| Relief Valve Setting | Standard Pilot |
| Cover End Flow @ RPM | 0.875 in |
| Shaft Dia. | 13 Tooth Splined |
| Minor Diameter [Min | 2520VQ |
| GPM @ 1,800 rpm, Shaft End | 1 3/8 in |
| Model No. | Double |
| Mounting | Buna-N |
| Pilot Type | 2500 |
| Integral Valve Configuration | 0.715 in |
| Cover End Pressure [Max | SAE B, 2 Bolt |
| Rotation | Single Shaft Seal |
| Displacement Cover End (cu in/revolution) | 16/32 |
| Controlled Flow Rate | 2700 |
| Shaft Length | 2500 |
| Seal Material | N/A |
| Shaft Seal Type | 14 gal/min @ 1200 rpm, 21 gal/min @ 1800 rpm |
| Max. RPM [Max | 0.873 in |
| Port Type | 0.872 in |
| Shaft End Flow @ RPM | N/A |
| Pump Series | N/A |
| Pressure Port Size, Shaft End | N/A |
| Shaft End Pressure [Max | 17 gal/min @ 1200 rpm, 25.5 gal/min @ 1800 rpm |
| Port Size | 2520VQ17A14-11BC20-LH |
| Mounting Flange | 2000 |
| Shaft Key | 3000 |
| Port Orientation - Shaft End | 21 |
| Minor Diameter [Max | 25.5 |
| Manufacturer Part No. | w/o Integral Valves |
| Major Diameter [Min | Outlet 45° CW from Inlet |
| Minor Diameter | Outlet 90° CCW from Inlet |
| Displacement Shaft End (cu in/revolution) | 3.4 |
| Shaft End RPM [Max | 1 in Flange |
| GPM @ 1,800 rpm, Cover End | 2.8 |
