CONSOLIDATED BEARING GE-120 SW Plain Bearings
Various BEARING SUDAMERICANA,S.A. CONSOLIDATED BEARING 80000 N Basic Static Radial Load Rating Co types and sizes to 1.50 mm Fillet Radius ra 4300 rpm Oil Speed Rating n2 accommodate your CONSOLIDATED BEARING GE-120 SW Plain Bearings requirements.
What is GE-120 SW bearing cross reference?
Brand Name: | CONSOLIDATED BEARING |
Model Number: | GE-120 SW |
Shaft End Pressure [Max: | 101.0 LB |
Shaft Length: | Flange Mount |
Port Orientation - Cover End: | Left Hand (CCW) |
Displacement Shaft End (cu in/revolution): | 4525VQ60A17-1DC20LH |
Shaft End RPM [Max: | 3 1/2 |
Relief Valve Setting: | Flange |
Pressure Port Size, Shaft End: | 5/16 in |
Weight: | Standard Pilot |
Product Details
Shaft End Pressure [Max | 101.0 LB |
Shaft Length | Flange Mount |
Port Orientation - Cover End | Left Hand (CCW) |
Displacement Shaft End (cu in/revolution) | 4525VQ60A17-1DC20LH |
Shaft End RPM [Max | 3 1/2 |
Relief Valve Setting | Flange |
Pressure Port Size, Shaft End | 5/16 in |
Weight | Standard Pilot |
Shaft Key | 1.25 in |
Cover End Flow @ RPM | Straight w/ Key |
Major Diameter [Max | 4525VQ |
Minor Diameter [Min | 1 15/16 in |
Integral Valve Configuration | Buna-N |
Spline Description | 2200 |
Port Size | N/A |
Displacement Cover End (cu in/revolution) | SAE C, 2 Bolt |
Rotation | Single Shaft Seal |
Shaft Type | N/A |
Minor Diameter [Max | 2200 |
Pressure Port Size, Cover End | 2200 |
GPM @ 1,800 rpm, Shaft End | N/A |
Max. RPM [Max | 17 gal/min @ 1200 rpm, 25.5 gal/min @ 1800 rpm |
Port Type | N/A |
Pilot Type | N/A |
Seal Material | N/A |
Mounting Flange | N/A |
Manufacturer Part No. | N/A |
Shaft Dia. | 60 gal/min @ 1200 rpm, 90 gal/min @ 1800 rpm |
Pump Series | 4525VQ60A17-1DC20LH |
Cover End RPM [Max | 3000 |
Port Orientation - Shaft End | 2500 |
GPM @ 1,800 rpm, Cover End | 25.5 |
Cover End Pressure [Max | 90 |
Major Diameter [Min | w/o Integral Valves |
Model No. | Outlet 45° CW from Inlet |
Mounting | Outlet 90° CW from Inlet |
Controlled Flow Rate | 1 in Flange |
Shaft End Flow @ RPM | 1 1/2 in Flange |
Minor Diameter | 3.37 |
Shaft Seal Type | 11.8 |