DODGE NSTU-GT-25M Take Up Unit Bearings
How do you find the DODGE NSTU-GT-25M Take Up Unit Bearings specification? Manufacturers Online B04144 Product Group Free 0 Weight check！ BEARING SUDAMERICANA,S.A. 0.0 Inventory
What is NSTU-GT-25M bearing interchange？
| Brand Name: | DODGE |
| Model Number: | NSTU-GT-25M |
| Cover End Pressure [Max: | 18.0 LB |
| Shaft Dia.: | Flange Mount |
| Pressure Port Size, Shaft End: | Right Hand (CW) |
| Seal Material: | 1 1/4 |
| Pilot Type: | NPT |
| Shaft End Pressure [Max: | N/A |
| Major Diameter [Min: | 11 |
| Port Orientation - Cover End: | 7 gpm @ 1200 rpm |
Product Details
| Cover End Pressure [Max | 18.0 LB |
| Shaft Dia. | Flange Mount |
| Pressure Port Size, Shaft End | Right Hand (CW) |
| Seal Material | 1 1/4 |
| Pilot Type | NPT |
| Shaft End Pressure [Max | N/A |
| Major Diameter [Min | 11 |
| Port Orientation - Cover End | 7 gpm @ 1200 rpm |
| Cover End RPM [Max | 0.73 in |
| Pump Series | 11 Tooth Splined |
| Manufacturer Part No. | 11 / 1800 |
| Port Size | V20 |
| Minor Diameter [Max | 1.25 in |
| Shaft Key | 3/4 in NPT |
| Shaft Length | Buna-N |
| Displacement Cover End (cu in/revolution) | 3000 |
| Major Diameter [Max | 2500 psi |
| Displacement Shaft End (cu in/revolution) | 10 1/2 |
| Port Orientation - Shaft End | P |
| Controlled Flow Rate | SAE A, 2 Bolt |
| Shaft End RPM [Max | P |
| Minor Diameter | 1 |
| Cover End Flow @ RPM | Inline w/Inlet |
| Minor Diameter [Min | 1.39 |
| Shaft End Flow @ RPM | w/o Integral Valves |
| Relief Valve Setting | 38C |
DODGE WSTU-IP-115RE Take Up Unit Bearings
DODGE EFC-IP-408L Flange Block Bearings
1.625 Inch | 41.275 Millimeter x 2.813 Inch | 71.45 Millimeter x 2.125 Inch | 53.98 Millimeter DODGE P2B-IP-110L Pillow Block Bearings
4 Inch | 101.6 Millimeter x 4.703 Inch | 119.456 Millimeter x 4.25 Inch | 107.95 Millimeter DODGE P4B-IP-400L Pillow Block Bearings
DODGE FC-S2-300R Flange Block Bearings
DODGE F2B-SLX-103 Flange Block Bearings