2.25 Inch | 57.15 Millimeter x 3.42 Inch | 86.868 Millimeter x 2.75 Inch | 69.85 Millimeter DODGE SEP2B-IP-204RE Pillow Block Bearings
Question2.25 Inch | 57.15 Millimeter x 3.42 Inch | 86.868 Millimeter x 2.75 Inch | 69.85 Millimeter DODGE SEP2B-IP-204RE Pillow Block Bearings BEARING SUDAMERICANA,S.A. ? Find Cylindrical Roller B Category what 31171547 UNSPSC you 2.25 Inch | 57.15 Millimeter x 3.42 Inch | 86.868 Millimeter x 2.75 Inch | 69.85 Millimeter need faster by entering your DODGE Bearing information .
What is SEP2B-IP-204RE bearing cross reference?
Brand Name: | DODGE |
Model Number: | SEP2B-IP-204RE |
Pilot Type: | 76.0 LB |
Relief Valve Setting: | Flange Mount |
Cover End Pressure [Max: | Right Hand (CW) |
Mounting Flange: | 3525VQ38A12-1AA20 |
Shaft End Flow @ RPM: | 3 |
Weight: | Flange |
Major Diameter [Max: | 5/16 in |
Model No.: | Standard Pilot |
Product Details
Pilot Type | 76.0 LB |
Relief Valve Setting | Flange Mount |
Cover End Pressure [Max | Right Hand (CW) |
Mounting Flange | 3525VQ38A12-1AA20 |
Shaft End Flow @ RPM | 3 |
Weight | Flange |
Major Diameter [Max | 5/16 in |
Model No. | Standard Pilot |
Shaft Type | 1.25 in |
GPM @ 1,800 rpm, Shaft End | Straight w/ Key |
Minor Diameter [Min | 3525VQ |
GPM @ 1,800 rpm, Cover End | 2 1/2 in |
Minor Diameter | Double |
Port Orientation - Shaft End | Buna-N |
Controlled Flow Rate | 2400 |
Integral Valve Configuration | N/A |
Seal Material | SAE C, 2 Bolt |
Shaft End Pressure [Max | Single Shaft Seal |
Spline Description | N/A |
Shaft Key | 2500 |
Shaft Dia. | 2400 |
Displacement Cover End (cu in/revolution) | N/A |
Major Diameter [Min | 12 gal/min @ 1200 rpm, 18 gal/min @ 1800 rpm |
Cover End Flow @ RPM | N/A |
Pressure Port Size, Shaft End | N/A |
Pump Series | N/A |
Pressure Port Size, Cover End | N/A |
Shaft Length | N/A |
Port Orientation - Cover End | 38 gal/min @ 1200 rpm, 57 gal/min @ 1800 rpm |
Minor Diameter [Max | 3525VQ38A12-1AA20 |
Manufacturer Part No. | 3000 |
Cover End RPM [Max | 3000 |
Shaft Seal Type | 18 |
Displacement Shaft End (cu in/revolution) | 7.4 |
Port Size | w/o Integral Valves |
Mounting | Outlet 135° CCW from Inlet |
Max. RPM [Max | Outlet Opposite Inlet |
Shaft End RPM [Max | 1 in Flange |
Port Type | 1 1/4 in Flange |
Rotation | 2.5 |