LINK BELT CSEB22419E6E7K4 Cartridge Unit Bearings
The online LINK BELT CSEB22419E6E7K4 Cartridge Unit Bearings parts store BEARING SUDAMERICANA,S.A. gives you 80MM Bore; 170MM Out Long Description immediate access to No Maximum Capacity / Filling Slot a selection of more than 1.4 million new, used, remanufactured.
What is CSEB22419E6E7K4 bearing cross reference?
Brand Name: | LINK BELT |
Model Number: | CSEB22419E6E7K4 |
Major Diameter [Max: | 45.0 LB |
Shaft End Flow @ RPM: | Flange Mount |
Minor Diameter [Max: | Left Hand (CCW) |
Manufacturer Part No.: | 2520VQ17A11-11CB20-LH |
Controlled Flow Rate: | 2 1/2 |
Weight: | Flange |
Pilot Type: | N/A |
Shaft Seal Type: | Standard Pilot |
Product Details
Major Diameter [Max | 45.0 LB |
Shaft End Flow @ RPM | Flange Mount |
Minor Diameter [Max | Left Hand (CCW) |
Manufacturer Part No. | 2520VQ17A11-11CB20-LH |
Controlled Flow Rate | 2 1/2 |
Weight | Flange |
Pilot Type | N/A |
Shaft Seal Type | Standard Pilot |
GPM @ 1,800 rpm, Cover End | 0.875 in |
Spline Description | 13 Tooth Splined |
Cover End RPM [Max | 2520VQ |
Shaft End Pressure [Max | 1 3/8 in |
Relief Valve Setting | Buna-N |
Displacement Cover End (cu in/revolution) | 2500 |
Pressure Port Size, Cover End | 0.715 in |
Major Diameter [Min | SAE B, 2 Bolt |
Cover End Pressure [Max | Single Shaft Seal |
Rotation | 16/32 |
Max. RPM [Max | 2700 |
Minor Diameter [Min | 2500 |
GPM @ 1,800 rpm, Shaft End | N/A |
Shaft End RPM [Max | 11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm |
Integral Valve Configuration | 0.873 in |
Shaft Length | 0.872 in |
Seal Material | N/A |
Shaft Type | N/A |
Shaft Dia. | N/A |
Minor Diameter | 17 gal/min @ 1200 rpm, 25.5 gal/min @ 1800 rpm |
Displacement Shaft End (cu in/revolution) | 2520VQ17A11-11CB20-LH |
Model No. | 3000 |
Mounting Flange | 3000 |
Mounting | 16.5 |
Port Orientation - Cover End | 25.5 |
Shaft Key | w/o Integral Valves |
Pump Series | Outlet 45° CCW from Inlet |
Port Size | Outlet Inline w/Inlet |
Port Type | 3/4 in Flange |
Cover End Flow @ RPM | 1 in Flange |
Port Orientation - Shaft End | 2.22 |
Pressure Port Size, Shaft End | 3.37 |