1.125 Inch | 28.575 Millimeter x 1.5 Inch | 38.1 Millimeter x 1.75 Inch | 44.45 Millimeter SEALMASTER MP-18 Pillow Block Bearings
1.125 Inch | 28.575 Millimeter x 1.5 Inch | 38.1 Millimeter x 1.75 Inch | 44.45 Millimeter SEALMASTER MP-18 Pillow Block Bearings, Units and Housings CAD 2.5 mm ra max models , 1.125 Inch | 28.575 Millimeter x 1.5 Inch | 38.1 Millimeter x 1.75 Inch | 44.45 Millimeter SEALMASTER Bearing Manufacturing Service . 1,220 kN Dynamic load, C Get Your BEARING SUDAMERICANA,S.A. Free.
What is MP-18 bearing interchange?
Brand Name: | SEALMASTER |
Model Number: | MP-18 |
Shaft Dia.: | 32.0 LB |
Integral Valve Configuration: | Flange Mount |
GPM @ 1,800 rpm, Cover End: | Right Hand (CW) |
Shaft End RPM [Max: | 12 gal/min @ 1200 rpm |
Displacement Cover End (cu in/revolution): | 25VQ12A-11B20 |
Max. RPM [Max: | 1.5 |
Shaft End Flow @ RPM: | Flange |
Minor Diameter [Min: | N/A |
Product Details
Shaft Dia. | 32.0 LB |
Integral Valve Configuration | Flange Mount |
GPM @ 1,800 rpm, Cover End | Right Hand (CW) |
Shaft End RPM [Max | 12 gal/min @ 1200 rpm |
Displacement Cover End (cu in/revolution) | 25VQ12A-11B20 |
Max. RPM [Max | 1.5 |
Shaft End Flow @ RPM | Flange |
Minor Diameter [Min | N/A |
Weight | 20 |
Relief Valve Setting | 12 gpm @ 1200 rpm |
Cover End Pressure [Max | 11 |
Pressure Port Size, Shaft End | 0.875 in |
Port Size | 13 Tooth Splined |
Rotation | 18 gpm @ 1800 rpm |
Port Orientation - Cover End | 25VQ |
Shaft Type | 1 3/8 in |
Cover End Flow @ RPM | Single |
Displacement Shaft End (cu in/revolution) | None |
Mounting Flange | 1 in Flange |
Pump Series | Buna-N |
Pressure Port Size, Cover End | 2700 |
Model No. | 3000 psi |
Seal Material | 18 |
Controlled Flow Rate | A |
GPM @ 1,800 rpm, Shaft End | SAE B, 2 Bolt |
Shaft Length | Single Shaft Seal |
Minor Diameter | 90° CCW from Inlet |
Shaft Seal Type | 25VQ12A-11B20 |
Shaft Key | 2.5 |
Major Diameter [Max | w/o Integral Valves |