0.938 Inch | 23.825 Millimeter x 1.375 Inch | 34.925 Millimeter x 1.438 Inch | 36.525 Millimeter SEALMASTER NP-15C CR Pillow Block Bearings
Manufacturers of all SEALMASTER Bearing are represented in our partial list of clients. Contact Gary for 0.938 Inch | 23.825 Millimeter x 1.375 Inch | 34.925 Millimeter x 1.438 Inch | 36.525 Millimeter a complete 0.938 Inch | 23.825 Millimeter x 1.375 Inch | 34.925 Millimeter x 1.438 Inch | 36.525 Millimeter SEALMASTER NP-15C CR Pillow Block Bearings list of clients BEARING SUDAMERICANA,S.A. and projects.
What is NP-15C CR bearing interchange?
Brand Name: | SEALMASTER |
Model Number: | NP-15C CR |
Port Size: | 45.0 LB |
Minor Diameter [Max: | Flange Mount |
Seal Material: | Right Hand (CW) |
Max. RPM [Max: | 2520VQ17A5-1DC20 |
Port Type: | 2 1/2 |
Rotation: | Flange |
Pump Series: | 3/16 in |
Spline Description: | Standard Pilot |
Product Details
Port Size | 45.0 LB |
Minor Diameter [Max | Flange Mount |
Seal Material | Right Hand (CW) |
Max. RPM [Max | 2520VQ17A5-1DC20 |
Port Type | 2 1/2 |
Rotation | Flange |
Pump Series | 3/16 in |
Spline Description | Standard Pilot |
Cover End Flow @ RPM | 0.875 in |
Relief Valve Setting | Straight w/ Key |
GPM @ 1,800 rpm, Cover End | 2520VQ |
Shaft Type | 1.9375 in |
Major Diameter [Min | Buna-N |
Pressure Port Size, Cover End | 2500 |
Mounting | N/A |
Mounting Flange | SAE B, 2 Bolt |
Shaft Length | Single Shaft Seal |
Shaft Dia. | N/A |
Shaft Seal Type | 2700 |
Shaft End RPM [Max | 2500 |
Displacement Cover End (cu in/revolution) | N/A |
Pressure Port Size, Shaft End | 5 gal/min @ 1200 rpm, 7.5 gal/min @ 1800 rpm |
Model No. | N/A |
Minor Diameter [Min | N/A |
Controlled Flow Rate | N/A |
GPM @ 1,800 rpm, Shaft End | N/A |
Shaft End Flow @ RPM | N/A |
Port Orientation - Cover End | 17 gal/min @ 1200 rpm, 25.5 gal/min @ 1800 rpm |
Cover End RPM [Max | 2520VQ17A5-1DC20 |
Integral Valve Configuration | 3000 |
Manufacturer Part No. | 3000 |
Shaft Key | 7.5 |
Pilot Type | 25.5 |
Minor Diameter | w/o Integral Valves |
Cover End Pressure [Max | Outlet 45° CW from Inlet |
Weight | Outlet 90° CW from Inlet |
Displacement Shaft End (cu in/revolution) | 3/4 in Flange |
Port Orientation - Shaft End | 1 in Flange |
Shaft End Pressure [Max | 1.1 |
Major Diameter [Max | 3.37 |