0.984 Inch | 25 Millimeter x 1.375 Inch | 34.925 Millimeter x 1.437 Inch | 36.5 Millimeter SEALMASTER NP-205C CR Pillow Block Bearings
With over 10170 full-service stores, our 0.984 Inch | 25 Millimeter x 1.375 Inch | 34.925 Millimeter x 1.437 Inch | 36.5 Millimeter SEALMASTER NP-205C CR Pillow Block Bearings inventory is extensive 19 mm A1 and our parts are BEARING SUDAMERICANA,S.A. priced 0.984 Inch | 25 Millimeter x 1.375 Inch | 34.925 Millimeter x 1.437 Inch | 36.5 Millimeter right. within 24 hours. This helps you maximize your 6.65 kN C0 productivity by saving time and your hard-earned dollars.
What is NP-205C CR bearing cross reference?
Brand Name: | SEALMASTER |
Model Number: | NP-205C CR |
Shaft End Pressure [Max: | 75.0 LB |
Shaft Seal Type: | Flange Mount |
Controlled Flow Rate: | Right Hand (CW) |
Shaft Dia.: | 60 gal/min @ 1200 rpm |
Minor Diameter [Min: | 45V60A-86D22R |
Relief Valve Setting: | 3 |
Displacement Shaft End (cu in/revolution): | Flange |
Port Orientation - Shaft End: | 3/8 in |
Product Details
Shaft End Pressure [Max | 75.0 LB |
Shaft Seal Type | Flange Mount |
Controlled Flow Rate | Right Hand (CW) |
Shaft Dia. | 60 gal/min @ 1200 rpm |
Minor Diameter [Min | 45V60A-86D22R |
Relief Valve Setting | 3 |
Displacement Shaft End (cu in/revolution) | Flange |
Port Orientation - Shaft End | 3/8 in |
Cover End Pressure [Max | 22 |
Seal Material | 60 gpm @ 1200 rpm |
Pressure Port Size, Cover End | 86 |
Major Diameter [Min | 1.5 in |
Major Diameter [Max | Straight w/ Key |
Pressure Port Size, Shaft End | 90 gpm @ 1800 rpm |
Manufacturer Part No. | 45V |
Port Type | 2 15/16 in |
Rotation | Single |
Max. RPM [Max | None |
Port Size | 1 1/2 in Code 61 Flange |
Shaft End Flow @ RPM | Buna-N |
Spline Description | 1800 |
Minor Diameter | 2500 psi |
Pump Series | 90 |
Integral Valve Configuration | SAE C, 2 Bolt |
Model No. | Single Shaft Seal |
GPM @ 1,800 rpm, Cover End | 90° CW from Inlet |
Cover End RPM [Max | 45V60A-86D22R |
Shaft Key | 11.8 |
GPM @ 1,800 rpm, Shaft End | w/o Integral Valves |