SEALMASTER SFT-31TC Flange Block Bearings
Offer BEARING SUDAMERICANA,S.A. High Quality 11.5 Nm Recommended tightening torque for set screw Brand 18.2 mm A5 SEALMASTER SFT-31TC Flange Block Bearings .Contact Us Online to 12 mm A1 Get Best Quote.
What is SFT-31TC bearing interchange？
| Brand Name: | SEALMASTER |
| Model Number: | SFT-31TC |
| Cover End RPM [Max: | 75.0 LB |
| Shaft End Flow @ RPM: | Flange Mount |
| Major Diameter [Min: | Left Hand (CCW) |
| Spline Description: | 3520VQ21A14-1CC20LH |
| Relief Valve Setting: | 3 |
| Displacement Cover End (cu in/revolution): | Flange |
| Shaft End RPM [Max: | 5/16 in |
| Port Type: | Standard Pilot |
Product Details
| Cover End RPM [Max | 75.0 LB |
| Shaft End Flow @ RPM | Flange Mount |
| Major Diameter [Min | Left Hand (CCW) |
| Spline Description | 3520VQ21A14-1CC20LH |
| Relief Valve Setting | 3 |
| Displacement Cover End (cu in/revolution) | Flange |
| Shaft End RPM [Max | 5/16 in |
| Port Type | Standard Pilot |
| Controlled Flow Rate | 1.25 in |
| Port Orientation - Shaft End | Straight w/ Key |
| Pump Series | 3520VQ |
| Pressure Port Size, Cover End | 2 1/2 in |
| Shaft Seal Type | Buna-N |
| Weight | 2500 |
| Displacement Shaft End (cu in/revolution) | N/A |
| Port Size | SAE C, 2 Bolt |
| Mounting | Single Shaft Seal |
| Integral Valve Configuration | N/A |
| Cover End Flow @ RPM | 2500 |
| Shaft Dia. | 2500 |
| Port Orientation - Cover End | N/A |
| Cover End Pressure [Max | 14 gal/min @ 1200 rpm, 21 gal/min @ 1800 rpm |
| GPM @ 1,800 rpm, Shaft End | N/A |
| Max. RPM [Max | N/A |
| Shaft Type | N/A |
| GPM @ 1,800 rpm, Cover End | N/A |
| Pressure Port Size, Shaft End | N/A |
| Seal Material | 21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm |
| Minor Diameter [Max | 3520VQ21A14-1CC20LH |
| Minor Diameter | 2000 |
| Pilot Type | 3000 |
| Model No. | 21 |
| Major Diameter [Max | 31.5 |
| Shaft Key | w/o Integral Valves |
| Rotation | Outlet 45° CW from Inlet |
| Mounting Flange | Outlet Inline w/Inlet |
| Shaft Length | 3/4 in Flange |
| Manufacturer Part No. | 1 1/4 in Flange |
| Shaft End Pressure [Max | 2.8 |
| Minor Diameter [Min | 4.12 |
SEALMASTER SFT-35T Flange Block Bearings
SEALMASTER SFT-207TMC Flange Block Bearings
1.378 Inch | 35 Millimeter x 3.626 Inch | 92.1 Millimeter x 2.756 Inch | 70 Millimeter SEALMASTER SEHB-207 Hanger Unit Bearings
2.438 Inch | 61.925 Millimeter x 3.5 Inch | 88.9 Millimeter x 3 Inch | 76.2 Millimeter SEALMASTER MFPD-39 Pillow Block Bearings
3.937 Inch | 100 Millimeter x 4.626 Inch | 117.5 Millimeter x 8.126 Inch | 206.4 Millimeter SEALMASTER SCHB-320 Hanger Unit Bearings
SEALMASTER CFF 3Y Spherical Plain Bearings - Rod Ends