SEALMASTER USFC5000AE-303-C Flange Block Bearings
Enjoy High 8 Nm Recommended tightening torque for set screw Margins 24 mm e on Competitive SEALMASTER Bearing BEARING SUDAMERICANA,S.A. Pricing.Great Wholesale Products at Low Costs.
What is USFC5000AE-303-C bearing interchange?
Brand Name: | SEALMASTER |
Model Number: | USFC5000AE-303-C |
Shaft End RPM [Max: | 45.0 LB |
Seal Material: | Flange Mount |
Relief Valve Setting: | Left Hand (CCW) |
GPM @ 1,800 rpm, Cover End: | 2520VQ14E14-11CC20-LH |
Port Orientation - Shaft End: | 2.5 |
Integral Valve Configuration: | Flange |
Displacement Cover End (cu in/revolution): | N/A |
Mounting Flange: | Standard Pilot |
Product Details
Shaft End RPM [Max | 45.0 LB |
Seal Material | Flange Mount |
Relief Valve Setting | Left Hand (CCW) |
GPM @ 1,800 rpm, Cover End | 2520VQ14E14-11CC20-LH |
Port Orientation - Shaft End | 2.5 |
Integral Valve Configuration | Flange |
Displacement Cover End (cu in/revolution) | N/A |
Mounting Flange | Standard Pilot |
Max. RPM [Max | 0.875 in |
Shaft Seal Type | 13 Tooth Splined |
Mounting | 2520VQ |
Pilot Type | 1 3/8 in |
Controlled Flow Rate | Double |
Cover End Flow @ RPM | Buna-N |
Displacement Shaft End (cu in/revolution) | 2.8 |
Model No. | 0.715 in |
Pressure Port Size, Cover End | SAE B, 2 Bolt |
Cover End Pressure [Max | Single Shaft Seal |
Shaft End Flow @ RPM | 16/32 |
Shaft End Pressure [Max | 2700 |
Major Diameter [Min | 2700 |
Shaft Dia. | N/A |
Rotation | 14 gal/min @ 1200 rpm, 21 gal/min @ 1800 rpm |
Cover End RPM [Max | 0.873 in |
Minor Diameter [Max | 0.872 in |
Shaft Type | N/A |
Pressure Port Size, Shaft End | N/A |
Major Diameter [Max | N/A |
Port Orientation - Cover End | 14 gal/min @ 1200 rpm, 21 gal/min @ 1800 rpm |
Weight | 2520VQ14E14-11CC20-LH |
Shaft Key | 2000 |
Port Size | 3000 |
Minor Diameter | 21 |
GPM @ 1,800 rpm, Shaft End | 21 |
Manufacturer Part No. | w/o Integral Valves |
Port Type | Outlet 45° CW from Inlet |
Spline Description | Outlet Inline w/Inlet |
Minor Diameter [Min | 1 1/16 in SAE O-Ring |
Pump Series | 1 in Flange |
Shaft Length | 2.8 |