Hydraulic Pump Manufacturer CAT Steering Pump Gear Oil Pump 3S4386
Cover End Flow @ RPM: | 35.0 LB |
Port Orientation - Shaft End: | Flange Mount |
Pressure Port Size, Cover End: | Right Hand (CW) |
Shaft Seal Type: | V2020-1F13S9S-1BB30 |
Displacement Cover End (cu in/revolution): | 2 |
Weight: | Flange |
Cover End RPM [Max: | 3/16 in |
Shaft End Flow @ RPM: | N/A |
PDF |
|
Product Details
Cover End Flow @ RPM | 35.0 LB |
Port Orientation - Shaft End | Flange Mount |
Pressure Port Size, Cover End | Right Hand (CW) |
Shaft Seal Type | V2020-1F13S9S-1BB30 |
Displacement Cover End (cu in/revolution) | 2 |
Weight | Flange |
Cover End RPM [Max | 3/16 in |
Shaft End Flow @ RPM | N/A |
Major Diameter [Min | 0.875 in |
Model No. | Straight w/ Key |
Minor Diameter [Min | V2020 |
Port Type | 2 5/16 in |
Pilot Type | Double |
Pressure Port Size, Shaft End | Buna-N |
Controlled Flow Rate | 2400 |
GPM @ 1,800 rpm, Cover End | N/A |
Minor Diameter | SAE B, 2 Bolt |
Mounting | Single Shaft Seal |
Major Diameter [Max | N/A |
Shaft End RPM [Max | 2800 |
Spline Description | 2400 |
Shaft Key | N/A |
Seal Material | 9 gal/min @ 1200 rpm, 13.5 gal/min @ 1800 rpm |
Shaft Type | N/A |
GPM @ 1,800 rpm, Shaft End | N/A |
Rotation | N/A |
Port Orientation - Cover End | N/A |
Shaft Dia. | N/A |
Displacement Shaft End (cu in/revolution) | 2.6 |
Manufacturer Part No. | V2020-1F13S9S-1BB30 |
Port Size | 2500 |
Relief Valve Setting | 2200 |
Minor Diameter [Max | 13.5 |
Cover End Pressure [Max | 19.5 |
Mounting Flange | N/A |
Max. RPM [Max | Outlet 90° CCW from Inlet |
Integral Valve Configuration | Outlet 90° CCW from Inlet |
Shaft Length | 3/4 in SAE O-Ring |
Shaft End Pressure [Max | 3/4 in SAE O-Ring |
Pump Series | 1.8 |