Hydraulic Gear Pump Main Pump 705-51-10020 for Excavator PC200-2
Model No.: | 45.0 LB |
Spline Description: | Flange Mount |
Port Size: | Right Hand (CW) |
Port Type: | 2520VQ21A8-11AA20 |
Pressure Port Size, Shaft End: | 2 1/2 |
Cover End RPM [Max: | Flange |
Minor Diameter: | N/A |
Displacement Cover End (cu in/revolution): | Standard Pilot |
PDF |
|
Product Details
Model No. | 45.0 LB |
Spline Description | Flange Mount |
Port Size | Right Hand (CW) |
Port Type | 2520VQ21A8-11AA20 |
Pressure Port Size, Shaft End | 2 1/2 |
Cover End RPM [Max | Flange |
Minor Diameter | N/A |
Displacement Cover End (cu in/revolution) | Standard Pilot |
Manufacturer Part No. | 0.875 in |
Cover End Flow @ RPM | 13 Tooth Splined |
Controlled Flow Rate | 2520VQ |
Major Diameter [Max | 1 3/8 in |
Shaft Type | Buna-N |
Shaft Seal Type | 2500 |
Weight | 0.715 in |
GPM @ 1,800 rpm, Cover End | SAE B, 2 Bolt |
Minor Diameter [Min | Single Shaft Seal |
Shaft Length | 16/32 |
Mounting | 2700 |
Minor Diameter [Max | 2500 |
Port Orientation - Shaft End | N/A |
Integral Valve Configuration | 8 gal/min @ 1200 rpm, 12 gal/min @ 1800 rpm |
Rotation | 0.873 in |
Shaft End Pressure [Max | 0.872 in |
Max. RPM [Max | N/A |
Shaft Key | N/A |
Port Orientation - Cover End | N/A |
GPM @ 1,800 rpm, Shaft End | 21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm |
Shaft End RPM [Max | 2520VQ21A8-11AA20 |
Pump Series | 3000 |
Shaft Dia. | 3000 |
Pressure Port Size, Cover End | 12 |
Cover End Pressure [Max | 31.5 |
Seal Material | w/o Integral Valves |
Major Diameter [Min | Outlet 135° CCW from Inlet |
Relief Valve Setting | Outlet Opposite Inlet |
Mounting Flange | 3/4 in Flange |
Displacement Shaft End (cu in/revolution) | 1 in Flange |
Pilot Type | 1.67 |
Shaft End Flow @ RPM | 4.12 |