New Aftermarket PC225-7 Diesel Injection Fuel Feed Pump
Minor Diameter [Max: | 118.0 LB |
Controlled Flow Rate: | Flange Mount |
Minor Diameter: | Right Hand (CW) |
Model No.: | 4535VQ60A25-1DD20 |
Port Orientation - Cover End: | 4 |
Shaft Type: | Flange |
Port Type: | 5/16 in |
Spline Description: | Standard Pilot |
PDF |
|
Product Details
Minor Diameter [Max | 118.0 LB |
Controlled Flow Rate | Flange Mount |
Minor Diameter | Right Hand (CW) |
Model No. | 4535VQ60A25-1DD20 |
Port Orientation - Cover End | 4 |
Shaft Type | Flange |
Port Type | 5/16 in |
Spline Description | Standard Pilot |
Mounting Flange | 1.25 in |
Pressure Port Size, Cover End | Straight w/ Key |
Major Diameter [Min | 4535VQ |
Seal Material | 1 15/16 in |
Shaft Seal Type | Buna-N |
Displacement Cover End (cu in/revolution) | 2200 |
Minor Diameter [Min | N/A |
Cover End Pressure [Max | SAE C, 2 Bolt |
Cover End Flow @ RPM | Single Shaft Seal |
Pump Series | N/A |
GPM @ 1,800 rpm, Shaft End | 2200 |
Manufacturer Part No. | 2200 |
Displacement Shaft End (cu in/revolution) | N/A |
Relief Valve Setting | 25 gal/min @ 1200 rpm, 37.5 gal/min @ 1800 rpm |
Max. RPM [Max | N/A |
Shaft End RPM [Max | N/A |
Port Size | N/A |
Port Orientation - Shaft End | N/A |
Cover End RPM [Max | N/A |
Rotation | 60 gal/min @ 1200 rpm, 90 gal/min @ 1800 rpm |
Shaft End Pressure [Max | 4535VQ60A25-1DD20 |
GPM @ 1,800 rpm, Cover End | 3000 |
Shaft Dia. | 2500 |
Shaft End Flow @ RPM | 37.5 |
Shaft Length | 90 |
Shaft Key | w/o Integral Valves |
Mounting | Outlet 90° CW from Inlet |
Major Diameter [Max | Outlet 90° CW from Inlet |
Pilot Type | 1 1/4 in Flange |
Pressure Port Size, Shaft End | 1 1/2 in Flange |
Weight | 4.98 |
Integral Valve Configuration | 11.8 |