9T7729 Hydraulic Barrel for Cat Hydraulic Piston Pump 155-9916/9T3680
Shaft End Flow @ RPM: | 30.0 LB |
Max. RPM [Max: | Flange Mount |
Major Diameter [Min: | Right Hand (CW) |
Mounting: | V2010-1F13S2S-11AA-12 |
Spline Description: | 1.5 |
Cover End RPM [Max: | Flange |
Shaft End Pressure [Max: | N/A |
Rotation: | N/A |
PDF |
|
Product Details
Shaft End Flow @ RPM | 30.0 LB |
Max. RPM [Max | Flange Mount |
Major Diameter [Min | Right Hand (CW) |
Mounting | V2010-1F13S2S-11AA-12 |
Spline Description | 1.5 |
Cover End RPM [Max | Flange |
Shaft End Pressure [Max | N/A |
Rotation | N/A |
Minor Diameter [Min | 0.875 in |
Port Orientation - Shaft End | 13 Tooth Splined |
Displacement Cover End (cu in/revolution) | V2010 |
Model No. | 1 5/16 in |
Relief Valve Setting | Double |
Shaft Seal Type | Buna-N |
Shaft End RPM [Max | 2400 |
Manufacturer Part No. | 0.728 in |
Cover End Pressure [Max | SAE B, 2 Bolt |
Weight | Single Shaft Seal |
Integral Valve Configuration | 16/32 |
Port Orientation - Cover End | 3000 |
Seal Material | 2400 |
Shaft Type | N/A |
GPM @ 1,800 rpm, Cover End | 2 gal/min @ 1200 rpm, 3 gal/min @ 1800 rpm |
GPM @ 1,800 rpm, Shaft End | 0.873 in |
Minor Diameter | 0.872 in |
Pump Series | 0.734 in |
Major Diameter [Max | 0.723 in |
Port Size | N/A |
Shaft Dia. | 13 gal/min @ 1200 rpm, 19.5 gal/min @ 1800 rpm |
Port Type | V2010-1F13S2S-11AA-12 |
Mounting Flange | 2500 |
Pilot Type | 2200 |
Cover End Flow @ RPM | 3 |
Minor Diameter [Max | 19.5 |
Pressure Port Size, Shaft End | N/A |
Displacement Shaft End (cu in/revolution) | 2.6 |
Controlled Flow Rate | Outlet Opposite Inlet |
Shaft Key | 1/2 in SAE O-Ring |
Shaft Length | 3/4 in SAE O-Ring |
Pressure Port Size, Cover End | 0.4 |