DSG-03 Series Hydraulic Spool Directional Control Valve
Shaft Seal Type: | 45.0 LB |
Minor Diameter: | Flange Mount |
GPM @ 1,800 rpm, Cover End: | Right Hand (CW) |
Mounting: | 2520VQ12A5-11DD20 |
Cover End Flow @ RPM: | 2 1/2 |
Weight: | Flange |
Cover End RPM [Max: | N/A |
Mounting Flange: | Standard Pilot |
PDF |
|
Product Details
Shaft Seal Type | 45.0 LB |
Minor Diameter | Flange Mount |
GPM @ 1,800 rpm, Cover End | Right Hand (CW) |
Mounting | 2520VQ12A5-11DD20 |
Cover End Flow @ RPM | 2 1/2 |
Weight | Flange |
Cover End RPM [Max | N/A |
Mounting Flange | Standard Pilot |
GPM @ 1,800 rpm, Shaft End | 0.875 in |
Port Orientation - Cover End | 13 Tooth Splined |
Shaft End Flow @ RPM | 2520VQ |
Rotation | 1 3/8 in |
Shaft End Pressure [Max | Buna-N |
Max. RPM [Max | 2700 |
Integral Valve Configuration | 0.715 in |
Pressure Port Size, Shaft End | SAE B, 2 Bolt |
Relief Valve Setting | Single Shaft Seal |
Shaft Dia. | 16/32 |
Controlled Flow Rate | 2700 |
Cover End Pressure [Max | 2700 |
Seal Material | N/A |
Port Orientation - Shaft End | 5 gal/min @ 1200 rpm, 7.5 gal/min @ 1800 rpm |
Displacement Shaft End (cu in/revolution) | 0.873 in |
Port Type | 0.872 in |
Manufacturer Part No. | N/A |
Shaft Length | N/A |
Model No. | N/A |
Major Diameter [Min | 12 gal/min @ 1200 rpm, 18 gal/min @ 1800 rpm |
Displacement Cover End (cu in/revolution) | 2520VQ12A5-11DD20 |
Pump Series | 3000 |
Shaft Key | 3000 |
Pilot Type | 7.5 |
Shaft End RPM [Max | 18 |
Minor Diameter [Max | w/o Integral Valves |
Spline Description | Outlet 135° CW from Inlet |
Minor Diameter [Min | Outlet 90° CW from Inlet |
Shaft Type | 3/4 in Flange |
Pressure Port Size, Cover End | 1 in Flange |
Major Diameter [Max | 1.1 |
Port Size | 2.45 |