EX550-3 (HMGF95) Hydraulic Travel Motor Spare Parts
Mounting Flange: | 75.0 LB |
Model No.: | Flange Mount |
Port Size: | Left Hand (CCW) |
Shaft Type: | 3520VQ25A8-11DC20L |
Controlled Flow Rate: | 3 |
Mounting: | Flange |
Shaft Seal Type: | N/A |
Pressure Port Size, Shaft End: | Standard Pilot |
PDF |
|
Product Details
Mounting Flange | 75.0 LB |
Model No. | Flange Mount |
Port Size | Left Hand (CCW) |
Shaft Type | 3520VQ25A8-11DC20L |
Controlled Flow Rate | 3 |
Mounting | Flange |
Shaft Seal Type | N/A |
Pressure Port Size, Shaft End | Standard Pilot |
Shaft End Pressure [Max | 1.25 in |
Spline Description | 14 Tooth Splined |
Major Diameter [Min | 3520VQ |
Major Diameter [Max | 1 15/16 in |
Displacement Cover End (cu in/revolution) | Buna-N |
Max. RPM [Max | 2500 |
Shaft Length | 1.04 in |
Relief Valve Setting | SAE C, 2 Bolt |
Minor Diameter [Min | Single Shaft Seal |
Seal Material | 12/24 |
Minor Diameter [Max | 2500 |
Port Orientation - Shaft End | 2500 |
Pump Series | N/A |
Pressure Port Size, Cover End | 8 gal/min @ 1200 rpm, 12 gal/min @ 1800 rpm |
Integral Valve Configuration | 1.248 in |
Weight | 1.247 in |
Port Type | N/A |
Rotation | N/A |
Cover End Pressure [Max | N/A |
Port Orientation - Cover End | 25 gal/min @ 1200 rpm, 37.5 gal/min @ 1800 rpm |
Shaft Dia. | 3520VQ25A8-11DC20L |
Displacement Shaft End (cu in/revolution) | 3000 |
Shaft End Flow @ RPM | 3000 |
GPM @ 1,800 rpm, Shaft End | 12 |
Minor Diameter | 37.5 |
GPM @ 1,800 rpm, Cover End | w/o Integral Valves |
Shaft Key | Outlet 45° CW from Inlet |
Manufacturer Part No. | Outlet 90° CW from Inlet |
Shaft End RPM [Max | 3/4 in Flange |
Cover End Flow @ RPM | 1 1/4 in Flange |
Cover End RPM [Max | 1.67 |
Pilot Type | 4.98 |