Main Pump 487-6223 for CAT
| Minor Diameter [Max: | 75.0 LB |
| Minor Diameter: | Flange Mount |
| Pilot Type: | Left Hand (CCW) |
| Displacement Shaft End (cu in/revolution): | 42 gal/min @ 1200 rpm |
| Pressure Port Size, Cover End: | 45VQ42A-1A20-LH |
| Rotation: | 3 |
| Controlled Flow Rate: | Flange |
| Max. RPM [Max: | 5/16 in |
| PDF |
|
Product Details
| Minor Diameter [Max | 75.0 LB |
| Minor Diameter | Flange Mount |
| Pilot Type | Left Hand (CCW) |
| Displacement Shaft End (cu in/revolution) | 42 gal/min @ 1200 rpm |
| Pressure Port Size, Cover End | 45VQ42A-1A20-LH |
| Rotation | 3 |
| Controlled Flow Rate | Flange |
| Max. RPM [Max | 5/16 in |
| Major Diameter [Max | 20 |
| Shaft Key | 42 gpm @ 1200 rpm |
| Manufacturer Part No. | 1 |
| GPM @ 1,800 rpm, Shaft End | 1.25 in |
| Cover End Flow @ RPM | Straight w/ Key |
| Shaft Dia. | 63 gpm @ 1800 rpm |
| Shaft Type | 45VQ |
| Shaft Seal Type | 2.44 in |
| Shaft End Pressure [Max | None |
| Relief Valve Setting | 1 1/2 in Flange |
| Pump Series | Buna-N |
| Spline Description | 2200 |
| Cover End Pressure [Max | 2500 psi |
| Seal Material | 63 |
| Pressure Port Size, Shaft End | A |
| Cover End RPM [Max | SAE C, 2 Bolt |
| Integral Valve Configuration | Single Shaft Seal |
| Displacement Cover End (cu in/revolution) | Opposite Inlet Port |
| Port Size | 45VQ42A-1A20-LH |
| Weight | 8.5 |
| GPM @ 1,800 rpm, Cover End | w/o Integral Valves |
Low Speed BMP100 Hydraulic Orbit Motor For Replace Sauer
Hydraulic Motor Stator for Replace Poclain ms35 motor
Eaton Orbit Hydraulic Motor 101-1035-009/101-1035 BMPH100 Hydromotor
101-1051-009/101-1051 BMPH100 Hydraulic Auger Motor For Drilling Rig
BMSY/OMSY High Torque Replacement Charlynn Hydraulic Orbit Motor
Hydstar selling CBN-F300 CBN-E300 cbn e314 Hydraulic Gear Pump