PC60-7 Hydraulic Excavator 4D95 Engine Lubricating Oil Pump 6204-53-1100
| Shaft Type: | 15.0 LB |
| Rotation: | Flange Mount |
| Major Diameter [Min: | Right Hand (CW) |
| Minor Diameter: | SAE-16 |
| Major Diameter [Max: | SAE |
| Spline Description: | N/A |
| Minor Diameter [Max: | 20 |
| Cover End RPM [Max: | 4 gpm @ 1200 rpm |
| PDF |
|
Product Details
| Shaft Type | 15.0 LB |
| Rotation | Flange Mount |
| Major Diameter [Min | Right Hand (CW) |
| Minor Diameter | SAE-16 |
| Major Diameter [Max | SAE |
| Spline Description | N/A |
| Minor Diameter [Max | 20 |
| Cover End RPM [Max | 4 gpm @ 1200 rpm |
| Shaft Dia. | 11 |
| Pressure Port Size, Shaft End | 0.625 in |
| Mounting | 9 Tooth Splined |
| Shaft End Pressure [Max | 6 gpm @ 1800 rpm |
| Pump Series | V10 |
| Cover End Pressure [Max | 1 1/4 in |
| GPM @ 1,800 rpm, Shaft End | SAE-8 |
| Shaft End RPM [Max | Buna-N |
| Port Size | 3400 |
| Relief Valve Setting | 2500 psi |
| Shaft End Flow @ RPM | 6 |
| Displacement Cover End (cu in/revolution) | S |
| Controlled Flow Rate | SAE A, 2 Bolt |
| Shaft Seal Type | T |
| Minor Diameter [Min | 1 |
| Port Type | 90° CCW from Inlet |
| GPM @ 1,800 rpm, Cover End | 0.8 |
| Integral Valve Configuration | 5 gal/min |
| Pilot Type | Flow Control & Relief |
| Model No. | 1250 psi |
| Pressure Port Size, Cover End | 11B |
Low Speed BMP100 Hydraulic Orbit Motor For Replace Sauer
Hydraulic Motor Stator for Replace Poclain ms35 motor
Eaton Orbit Hydraulic Motor 101-1035-009/101-1035 BMPH100 Hydromotor
101-1051-009/101-1051 BMPH100 Hydraulic Auger Motor For Drilling Rig
BMSY/OMSY High Torque Replacement Charlynn Hydraulic Orbit Motor
Hydstar selling CBN-F300 CBN-E300 cbn e314 Hydraulic Gear Pump