705-51-20800 Hydraulic Gear Pump for Dozer D65EX-12 D65EX-15 D65P-12
| Port Type: | 18.0 LB |
| Port Orientation - Cover End: | Flange Mount |
| Shaft Type: | Left Hand (CCW) |
| Shaft End RPM [Max: | 1 1/4 |
| Minor Diameter [Max: | NPT |
| Shaft Seal Type: | #13 Woodruff |
| Port Orientation - Shaft End: | 22 |
| Major Diameter [Max: | 11 gpm @ 1200 rpm |
| PDF |
|
Product Details
| Port Type | 18.0 LB |
| Port Orientation - Cover End | Flange Mount |
| Shaft Type | Left Hand (CCW) |
| Shaft End RPM [Max | 1 1/4 |
| Minor Diameter [Max | NPT |
| Shaft Seal Type | #13 Woodruff |
| Port Orientation - Shaft End | 22 |
| Major Diameter [Max | 11 gpm @ 1200 rpm |
| Model No. | 0.875 in |
| Max. RPM [Max | Threaded w/ Woodruff Key |
| Pressure Port Size, Shaft End | 16.5 gpm @ 1800 rpm |
| Integral Valve Configuration | V20 |
| Seal Material | 2.78 in |
| Shaft End Pressure [Max | 3/4 in NPT |
| Displacement Shaft End (cu in/revolution) | Buna-N |
| Relief Valve Setting | 2500 |
| Controlled Flow Rate | 2500 psi |
| Cover End Flow @ RPM | 16 1/2 |
| Cover End Pressure [Max | P |
| Manufacturer Part No. | SAE A, 2 Bolt |
| Major Diameter [Min | P |
| Weight | 1 |
| Shaft Length | Opposite Inlet Port |
| Shaft Key | 2.22 |
| Cover End RPM [Max | 6 gal/min |
| Pressure Port Size, Cover End | Flow Control & Relief |
| Minor Diameter [Min | 1750 psi |
| Pilot Type | 3A |
Low Speed BMP100 Hydraulic Orbit Motor For Replace Sauer
Hydraulic Motor Stator for Replace Poclain ms35 motor
Eaton Orbit Hydraulic Motor 101-1035-009/101-1035 BMPH100 Hydromotor
101-1051-009/101-1051 BMPH100 Hydraulic Auger Motor For Drilling Rig
BMSY/OMSY High Torque Replacement Charlynn Hydraulic Orbit Motor
Hydstar selling CBN-F300 CBN-E300 cbn e314 Hydraulic Gear Pump