A4VG250 Gear Type Charge Pump for Variable Displacement Piston Pump
| Shaft Seal Type: | 15.0 LB |
| Minor Diameter: | Flange Mount |
| Seal Material: | Right Hand (CW) |
| Integral Valve Configuration: | SAE-16 |
| Weight: | SAE |
| Manufacturer Part No.: | N/A |
| Shaft End Flow @ RPM: | 20 |
| Mounting: | 3 gpm @ 1200 rpm |
| PDF |
|
Product Details
| Shaft Seal Type | 15.0 LB |
| Minor Diameter | Flange Mount |
| Seal Material | Right Hand (CW) |
| Integral Valve Configuration | SAE-16 |
| Weight | SAE |
| Manufacturer Part No. | N/A |
| Shaft End Flow @ RPM | 20 |
| Mounting | 3 gpm @ 1200 rpm |
| Minor Diameter [Min | 11 |
| Cover End Flow @ RPM | 0.625 in |
| Mounting Flange | 9 Tooth Splined |
| Shaft Type | 5 / 1800 |
| Max. RPM [Max | V10 |
| GPM @ 1,800 rpm, Shaft End | 1.25 in |
| GPM @ 1,800 rpm, Cover End | 1/2 in NPT |
| Port Orientation - Shaft End | Buna-N |
| Shaft Length | 4000 |
| Shaft Dia. | 2500 psi |
| Shaft End RPM [Max | 4 1/2 |
| Port Orientation - Cover End | S |
| Major Diameter [Min | SAE A, 2 Bolt |
| Model No. | P |
| Port Size | 1 |
| Controlled Flow Rate | Opposite Inlet Port |
| Relief Valve Setting | 0.6 |
| Displacement Shaft End (cu in/revolution) | w/o Integral Valves |
| Displacement Cover End (cu in/revolution) | 11A |
Low Speed BMP100 Hydraulic Orbit Motor For Replace Sauer
Hydraulic Motor Stator for Replace Poclain ms35 motor
Eaton Orbit Hydraulic Motor 101-1035-009/101-1035 BMPH100 Hydromotor
101-1051-009/101-1051 BMPH100 Hydraulic Auger Motor For Drilling Rig
BMSY/OMSY High Torque Replacement Charlynn Hydraulic Orbit Motor
Hydstar selling CBN-F300 CBN-E300 cbn e314 Hydraulic Gear Pump