Excavator Diesel Engine 6SD1 EX300-2/3 Water Pump 1-13610944-0 replace isuzu
Pressure Port Size, Shaft End: | 45.0 LB |
Shaft End Flow @ RPM: | Flange Mount |
Mounting Flange: | Right Hand (CW) |
Minor Diameter [Max: | 2520VQ21A5-1DD20 |
Manufacturer Part No.: | 2.5 |
Displacement Shaft End (cu in/revolution): | 4.1 |
Shaft Type: | 3/16 in |
Seal Material: | Standard Pilot |
PDF |
|
Product Details
Pressure Port Size, Shaft End | 45.0 LB |
Shaft End Flow @ RPM | Flange Mount |
Mounting Flange | Right Hand (CW) |
Minor Diameter [Max | 2520VQ21A5-1DD20 |
Manufacturer Part No. | 2.5 |
Displacement Shaft End (cu in/revolution) | 4.1 |
Shaft Type | 3/16 in |
Seal Material | Standard Pilot |
Port Type | 0.875 in |
Shaft Dia. | Straight w/ Key |
Port Orientation - Shaft End | 2520VQ |
Major Diameter [Max | 1 15/16 in |
Shaft End RPM [Max | Double |
Rotation | Buna-N |
Shaft Seal Type | 2500 |
Major Diameter [Min | N/A |
Pilot Type | SAE B, 2 Bolt |
Max. RPM [Max | Single Shaft Seal |
Shaft Key | N/A |
Shaft Length | 2700 |
GPM @ 1,800 rpm, Shaft End | 2500 |
Port Orientation - Cover End | N/A |
Minor Diameter [Min | 5 gal/min @ 1200 rpm, 7.5 gal/min @ 1800 rpm |
Cover End Pressure [Max | N/A |
Pressure Port Size, Cover End | N/A |
Pump Series | N/A |
Integral Valve Configuration | N/A |
Weight | N/A |
Spline Description | 21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm |
GPM @ 1,800 rpm, Cover End | 2520VQ21A5-1DD20 |
Shaft End Pressure [Max | 3000 |
Port Size | 3000 |
Mounting | 7.5 |
Minor Diameter | 31.5 |
Displacement Cover End (cu in/revolution) | w/o Integral Valves |
Model No. | Outlet 135° CW from Inlet |
Controlled Flow Rate | Outlet 90° CW from Inlet |
Cover End RPM [Max | 3/4 in Flange |
Relief Valve Setting | 1 in Flange |
Cover End Flow @ RPM | 1.1 |