Spare part 9T2232 plate wafer fits caterpillar
Seal Material: | 76.0 LB |
Shaft Key: | Flange Mount |
GPM @ 1,800 rpm, Cover End: | Right Hand (CW) |
Shaft Type: | 3525VQ25A21-11DD20 |
Manufacturer Part No.: | 3 |
Pressure Port Size, Cover End: | Flange |
Model No.: | N/A |
Max. RPM [Max: | Standard Pilot |
PDF |
|
Product Details
Seal Material | 76.0 LB |
Shaft Key | Flange Mount |
GPM @ 1,800 rpm, Cover End | Right Hand (CW) |
Shaft Type | 3525VQ25A21-11DD20 |
Manufacturer Part No. | 3 |
Pressure Port Size, Cover End | Flange |
Model No. | N/A |
Max. RPM [Max | Standard Pilot |
Shaft End Flow @ RPM | 1.25 in |
Cover End RPM [Max | 14 Tooth Splined |
Pump Series | 3525VQ |
Displacement Shaft End (cu in/revolution) | 1 15/16 in |
Relief Valve Setting | Buna-N |
Port Orientation - Shaft End | 2500 |
Pressure Port Size, Shaft End | 1.04 in |
Weight | SAE C, 2 Bolt |
Mounting Flange | Single Shaft Seal |
Port Type | 12/24 |
Displacement Cover End (cu in/revolution) | 2500 |
Minor Diameter [Max | 2500 |
Shaft Seal Type | N/A |
Cover End Pressure [Max | 21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm |
Integral Valve Configuration | 1.248 in |
Major Diameter [Max | 1.247 in |
Pilot Type | N/A |
Shaft Dia. | N/A |
Major Diameter [Min | N/A |
Rotation | 25 gal/min @ 1200 rpm, 37.5 gal/min @ 1800 rpm |
Minor Diameter | 3525VQ25A21-11DD20 |
Shaft Length | 3000 |
Shaft End Pressure [Max | 3000 |
Shaft End RPM [Max | 31.5 |
Cover End Flow @ RPM | 37.5 |
GPM @ 1,800 rpm, Shaft End | w/o Integral Valves |
Spline Description | Outlet 135° CW from Inlet |
Port Orientation - Cover End | Outlet 90° CW from Inlet |
Minor Diameter [Min | 1 in Flange |
Controlled Flow Rate | 1 1/4 in Flange |
Mounting | 4.12 |
Port Size | 4.98 |