Diesel Engine 3408 Parts Turbo 8N6553 Turbocharger for Caterpillar Truck
Pilot Type: | 30.0 LB |
Minor Diameter [Max: | Flange Mount |
Model No.: | Right Hand (CW) |
Shaft End Pressure [Max: | V2010-1F6S3S-11AA12 |
Rotation: | 1 1/2 |
Relief Valve Setting: | Flange |
Seal Material: | N/A |
Shaft End Flow @ RPM: | N/A |
PDF |
|
Product Details
Pilot Type | 30.0 LB |
Minor Diameter [Max | Flange Mount |
Model No. | Right Hand (CW) |
Shaft End Pressure [Max | V2010-1F6S3S-11AA12 |
Rotation | 1 1/2 |
Relief Valve Setting | Flange |
Seal Material | N/A |
Shaft End Flow @ RPM | N/A |
Shaft Length | 0.875 in |
Manufacturer Part No. | 13 Tooth Splined |
Integral Valve Configuration | V2010 |
Displacement Shaft End (cu in/revolution) | 1 5/16 in |
Cover End Pressure [Max | Buna-N |
GPM @ 1,800 rpm, Shaft End | 3000 |
Cover End Flow @ RPM | 0.728 in |
Pressure Port Size, Cover End | SAE B, 2 Bolt |
Shaft Key | Single Shaft Seal |
Port Orientation - Shaft End | 16/32 |
Port Orientation - Cover End | 3000 |
Port Type | 3000 |
Shaft Seal Type | N/A |
Mounting | 3 gal/min @ 1200 rpm, 4.5 gal/min @ 1800 rpm |
Major Diameter [Max | 0.873 in |
GPM @ 1,800 rpm, Cover End | 0.872 in |
Spline Description | 0.7335 in |
Shaft Type | 0.7225 in |
Minor Diameter | N/A |
Pressure Port Size, Shaft End | 6 gal/min @ 1200 rpm, 9 gal/min @ 1800 rpm |
Mounting Flange | V2010-1F6S3S-11AA12 |
Cover End RPM [Max | 2500 |
Shaft Dia. | 2500 |
Major Diameter [Min | 4.5 |
Max. RPM [Max | 9 |
Displacement Cover End (cu in/revolution) | N/A |
Minor Diameter [Min | Outlet 135° CCW from Inlet |
Port Size | Outlet Opposite Inlet |
Controlled Flow Rate | 1/2 in SAE O-Ring |
Weight | 3/4 in SAE O-Ring |
Shaft End RPM [Max | 0.6 |
Pump Series | 1.19 |