Excavator NH220 Diesel Engine D85 Water Pump 6685-61-1024 BM76506
Shaft End Pressure [Max: | 76.0 LB |
Shaft Key: | Flange Mount |
Seal Material: | Right Hand (CW) |
Port Orientation - Shaft End: | 3525VQ38A14-11AA20 |
Minor Diameter [Max: | 3 |
Shaft Type: | Flange |
Port Size: | N/A |
Cover End RPM [Max: | Standard Pilot |
PDF |
|
Product Details
Shaft End Pressure [Max | 76.0 LB |
Shaft Key | Flange Mount |
Seal Material | Right Hand (CW) |
Port Orientation - Shaft End | 3525VQ38A14-11AA20 |
Minor Diameter [Max | 3 |
Shaft Type | Flange |
Port Size | N/A |
Cover End RPM [Max | Standard Pilot |
Pressure Port Size, Shaft End | 1.25 in |
Spline Description | 14 Tooth Splined |
Major Diameter [Min | 3525VQ |
Weight | 1 15/16 in |
Shaft End RPM [Max | Double |
GPM @ 1,800 rpm, Cover End | Buna-N |
Port Orientation - Cover End | 2400 |
Cover End Flow @ RPM | 1.04 in |
Pressure Port Size, Cover End | SAE C, 2 Bolt |
Displacement Shaft End (cu in/revolution) | 7.4 |
Manufacturer Part No. | 12/24 |
Shaft End Flow @ RPM | 2500 |
Integral Valve Configuration | 2400 |
Cover End Pressure [Max | N/A |
Pilot Type | 14 gal/min @ 1200 rpm, 21 gal/min @ 1800 rpm |
Pump Series | 1.248 in |
Port Type | 1.247 in |
Mounting | N/A |
GPM @ 1,800 rpm, Shaft End | N/A |
Shaft Seal Type | N/A |
Shaft Length | 38 gal/min @ 1200 rpm, 57 gal/min @ 1800 rpm |
Max. RPM [Max | 3525VQ38A14-11AA20 |
Rotation | 3000 |
Relief Valve Setting | 3000 |
Minor Diameter | 21 |
Mounting Flange | 57 |
Displacement Cover End (cu in/revolution) | w/o Integral Valves |
Minor Diameter [Min | Outlet 135° CCW from Inlet |
Shaft Dia. | Outlet Opposite Inlet |
Major Diameter [Max | 1 in Flange |
Model No. | 1 1/4 in Flange |
Controlled Flow Rate | 2.8 |