CAT Excavator 345C 2668034 266-8034 Gear Pump Fan Hydraulic Pump
Manufacturer Part No.: | 30.0 LB |
Shaft Dia.: | Flange Mount |
Pilot Type: | Left Hand (CCW) |
Integral Valve Configuration: | V2010-1F11S6S-11AA12LH |
Relief Valve Setting: | 1 1/2 |
Cover End RPM [Max: | Flange |
Shaft End RPM [Max: | N/A |
Mounting Flange: | N/A |
PDF |
|
Product Details
Manufacturer Part No. | 30.0 LB |
Shaft Dia. | Flange Mount |
Pilot Type | Left Hand (CCW) |
Integral Valve Configuration | V2010-1F11S6S-11AA12LH |
Relief Valve Setting | 1 1/2 |
Cover End RPM [Max | Flange |
Shaft End RPM [Max | N/A |
Mounting Flange | N/A |
Shaft End Flow @ RPM | 0.875 in |
GPM @ 1,800 rpm, Cover End | 13 Tooth Splined |
Controlled Flow Rate | V2010 |
Minor Diameter [Min | 1 5/16 in |
Cover End Flow @ RPM | Buna-N |
Minor Diameter | 2500 |
Major Diameter [Min | 0.728 in |
Shaft Length | SAE B, 2 Bolt |
Shaft Seal Type | Single Shaft Seal |
GPM @ 1,800 rpm, Shaft End | 16/32 |
Shaft Type | 3000 |
Mounting | 2500 |
Displacement Shaft End (cu in/revolution) | N/A |
Pressure Port Size, Shaft End | 6 gal/min @ 1200 rpm, 9 gal/min @ 1800 rpm |
Pressure Port Size, Cover End | 0.873 in |
Shaft End Pressure [Max | 0.872 in |
Spline Description | 0.7335 in |
Port Orientation - Shaft End | 0.7225 in |
Weight | N/A |
Cover End Pressure [Max | 11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm |
Max. RPM [Max | V2010-1F11S6S-11AA12LH |
Minor Diameter [Max | 2200 |
Seal Material | 2500 |
Port Size | 9 |
Pump Series | 16.5 |
Major Diameter [Max | N/A |
Shaft Key | Outlet 135° CCW from Inlet |
Port Type | Outlet Opposite Inlet |
Displacement Cover End (cu in/revolution) | 1/2 in SAE O-Ring |
Model No. | 3/4 in SAE O-Ring |
Rotation | 1.19 |
Port Orientation - Cover End | 2.22 |