Hydraulic Cooling Water Pump Assembly For Engine Parts
Weight: | 45.0 LB |
Controlled Flow Rate: | Flange Mount |
Shaft End Flow @ RPM: | Right Hand (CW) |
Shaft Type: | 2520VQ21A11-11DD20 |
Integral Valve Configuration: | 2 1/2 |
Seal Material: | Flange |
Port Orientation - Shaft End: | N/A |
Displacement Shaft End (cu in/revolution): | Standard Pilot |
PDF |
|
Product Details
Weight | 45.0 LB |
Controlled Flow Rate | Flange Mount |
Shaft End Flow @ RPM | Right Hand (CW) |
Shaft Type | 2520VQ21A11-11DD20 |
Integral Valve Configuration | 2 1/2 |
Seal Material | Flange |
Port Orientation - Shaft End | N/A |
Displacement Shaft End (cu in/revolution) | Standard Pilot |
Pump Series | 0.875 in |
Cover End RPM [Max | 13 Tooth Splined |
Port Orientation - Cover End | 2520VQ |
Displacement Cover End (cu in/revolution) | 1.375 in |
Cover End Flow @ RPM | Buna-N |
Rotation | 2500 |
Shaft End Pressure [Max | 0.715 in |
Shaft Key | SAE B, 2 Bolt |
Pilot Type | Single Shaft Seal |
Max. RPM [Max | 16/32 |
Cover End Pressure [Max | 2700 |
Mounting | 2500 |
Mounting Flange | N/A |
Shaft Length | 11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm |
Port Size | 0.873 in |
Minor Diameter [Max | 0.872 in |
GPM @ 1,800 rpm, Shaft End | N/A |
Shaft Dia. | N/A |
Manufacturer Part No. | N/A |
Port Type | 21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm |
Minor Diameter | 2520VQ21A11-11DD20 |
GPM @ 1,800 rpm, Cover End | 3000 |
Major Diameter [Max | 3000 |
Spline Description | 16.5 |
Model No. | 31.5 |
Major Diameter [Min | w/o Integral Valves |
Relief Valve Setting | Outlet 135° CW from Inlet |
Shaft End RPM [Max | Outlet 90° CW from Inlet |
Shaft Seal Type | 3/4 in Flange |
Minor Diameter [Min | 1 in Flange |
Pressure Port Size, Cover End | 2.22 |
Pressure Port Size, Shaft End | 4.12 |