PC40-7 PC50-2 Excavator Hydraulic Gear Pump 705-41-08090
Spline Description: | 76.0 LB |
Shaft Type: | Flange Mount |
Minor Diameter: | Left Hand (CCW) |
Major Diameter [Min: | 3525VQ38A21-11AA20-LH |
Cover End Pressure [Max: | 3 |
Seal Material: | Flange |
Pressure Port Size, Cover End: | N/A |
Port Orientation - Shaft End: | Standard Pilot |
PDF |
|
Product Details
Spline Description | 76.0 LB |
Shaft Type | Flange Mount |
Minor Diameter | Left Hand (CCW) |
Major Diameter [Min | 3525VQ38A21-11AA20-LH |
Cover End Pressure [Max | 3 |
Seal Material | Flange |
Pressure Port Size, Cover End | N/A |
Port Orientation - Shaft End | Standard Pilot |
Model No. | 1.25 in |
Rotation | 14 Tooth Splined |
Shaft Dia. | 3525VQ |
Manufacturer Part No. | 1.9375 in |
Max. RPM [Max | Double |
Relief Valve Setting | Buna-N |
GPM @ 1,800 rpm, Cover End | 2400 |
Port Size | 1.04 in |
Shaft End Pressure [Max | SAE C, 2 Bolt |
Pilot Type | Single Shaft Seal |
GPM @ 1,800 rpm, Shaft End | 12/24 |
Pressure Port Size, Shaft End | 2500 |
Pump Series | 2400 |
Controlled Flow Rate | N/A |
Port Type | 21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm |
Cover End Flow @ RPM | 1.248 in |
Displacement Shaft End (cu in/revolution) | 7.4 |
Minor Diameter [Min | N/A |
Displacement Cover End (cu in/revolution) | N/A |
Shaft Seal Type | N/A |
Mounting Flange | 38 gal/min @ 1200 rpm, 57 gal/min @ 1800 rpm |
Major Diameter [Max | 3525VQ38A21-11AA20-LH |
Cover End RPM [Max | 3000 |
Weight | 3000 |
Shaft End RPM [Max | 31.5 |
Shaft Key | 57 |
Integral Valve Configuration | w/o Integral Valves |
Shaft End Flow @ RPM | Outlet 135° CCW from Inlet |
Mounting | Outlet Opposite Inlet |
Port Orientation - Cover End | 1 in Flange |
Minor Diameter [Max | 1 1/4 in Flange |
Shaft Length | 4.1 |