| Major Diameter [Min | 75.0 LB |
| Shaft Dia. | Flange Mount |
| Port Type | Right Hand (CW) |
| Shaft Key | 3520VQ30A8-11AA20 |
| Model No. | 3 |
| Pilot Type | Flange |
| Port Orientation - Cover End | N/A |
| Pump Series | Standard Pilot |
| Displacement Shaft End (cu in/revolution) | 1.25 in |
| Mounting Flange | 14 Tooth Splined |
| Seal Material | 3520VQ |
| Cover End Flow @ RPM | 1.9375 in |
| Port Orientation - Shaft End | Buna-N |
| Port Size | 2500 |
| Major Diameter [Max | 1.04 in |
| Shaft End Pressure [Max | SAE C, 2 Bolt |
| Cover End Pressure [Max | Single Shaft Seal |
| Integral Valve Configuration | 12/24 |
| Shaft Length | 2500 |
| GPM @ 1,800 rpm, Shaft End | 2500 |
| Weight | N/A |
| Pressure Port Size, Cover End | 8 gal/min @ 1200 rpm, 12 gal/min @ 1800 rpm |
| Manufacturer Part No. | 1.248 in |
| Max. RPM [Max | 1.247 in |
| Mounting | N/A |
| Displacement Cover End (cu in/revolution) | N/A |
| Rotation | N/A |
| GPM @ 1,800 rpm, Cover End | 30 gal/min @ 1200 rpm, 45 gal/min @ 1800 rpm |
| Relief Valve Setting | 3520VQ30A8-11AA20 |
| Pressure Port Size, Shaft End | 3000 |
| Cover End RPM [Max | 3000 |
| Shaft End RPM [Max | 12 |
| Shaft Seal Type | 45 |
| Shaft End Flow @ RPM | w/o Integral Valves |
| Controlled Flow Rate | Outlet 135° CCW from Inlet |
| Minor Diameter | Outlet Opposite Inlet |
| Spline Description | 3/4 in Flange |
| Minor Diameter [Min | 1 1/4 in Flange |
| Minor Diameter [Max | 1.67 |
| Shaft Type | 5.96 |
101-1026-009/101-1026 -AFT Hydraulic Orbit Motor Hidrolik BMPH80
Replace Poclain Torque Plunger Hydraulic Motor Rotor MSE05 for Concrete Mixer
Orbital Hydraulic Motor 103-1014-012/103-1014 bmrs250 Eaton Char-lynn hydraulikmotor
High Torque Low Speed 101-1024-009/101-1024 Hydraulic Motor BMPH400
Small Volume BMM32 Hydraulic Small Swing Motor For Roller
Excavator Hydraulic Gear Pump for 230 310 Pilot Pump