Main Clutch Pump 07421-71401 for Bulldozer D20A D20P D20Q D20S
| Minor Diameter [Min: | 15.0 LB |
| GPM @ 1,800 rpm, Shaft End: | Flange Mount |
| Pilot Type: | Left Hand (CCW) |
| Pressure Port Size, Cover End: | 6 gal/min @ 1200 rpm |
| Cover End Flow @ RPM: | SAE-16 |
| Shaft Key: | SAE |
| Major Diameter [Max: | N/A |
| Seal Material: | 20 |
| PDF |
|
Product Details
| Minor Diameter [Min | 15.0 LB |
| GPM @ 1,800 rpm, Shaft End | Flange Mount |
| Pilot Type | Left Hand (CCW) |
| Pressure Port Size, Cover End | 6 gal/min @ 1200 rpm |
| Cover End Flow @ RPM | SAE-16 |
| Shaft Key | SAE |
| Major Diameter [Max | N/A |
| Seal Material | 20 |
| Shaft Seal Type | 6 gpm @ 1200 rpm |
| Shaft End Flow @ RPM | 0.73 in |
| Shaft Length | 11 Tooth Splined |
| Rotation | 9 / 1750 |
| Shaft End RPM [Max | V10 |
| Minor Diameter | 1.25 in |
| Port Size | Single |
| Pressure Port Size, Shaft End | SAE-8 |
| Model No. | Buna-N |
| Displacement Cover End (cu in/revolution) | 3000 |
| Port Orientation - Cover End | 2200 psi |
| Port Type | 9 |
| Major Diameter [Min | S |
| Spline Description | SAE A, 2 Bolt |
| Mounting Flange | S |
| Pump Series | 1 |
| GPM @ 1,800 rpm, Cover End | Inline w/ Inlet |
| Shaft Type | 1.2 |
| Minor Diameter [Max | w/o Integral Valves |
| Mounting | 38C |
101-1026-009/101-1026 -AFT Hydraulic Orbit Motor Hidrolik BMPH80
Replace Poclain Torque Plunger Hydraulic Motor Rotor MSE05 for Concrete Mixer
Orbital Hydraulic Motor 103-1014-012/103-1014 bmrs250 Eaton Char-lynn hydraulikmotor
High Torque Low Speed 101-1024-009/101-1024 Hydraulic Motor BMPH400
Small Volume BMM32 Hydraulic Small Swing Motor For Roller
Excavator Hydraulic Gear Pump for 230 310 Pilot Pump