CBQ-F520/CBQ-F525/CBQ-F532/CBQ-F540/CBQ-F550 CBQ-G Industry Gear Pump
| Shaft End Flow @ RPM: | 75.0 LB |
| Shaft Key: | Flange Mount |
| Port Orientation - Shaft End: | Left Hand (CCW) |
| GPM @ 1,800 rpm, Shaft End: | 42 gal/min @ 1200 rpm |
| Mounting: | 45VQ42A-1A20-LH |
| Max. RPM [Max: | 3 |
| Relief Valve Setting: | Flange |
| Shaft Type: | 5/16 in |
| PDF |
|
Product Details
| Shaft End Flow @ RPM | 75.0 LB |
| Shaft Key | Flange Mount |
| Port Orientation - Shaft End | Left Hand (CCW) |
| GPM @ 1,800 rpm, Shaft End | 42 gal/min @ 1200 rpm |
| Mounting | 45VQ42A-1A20-LH |
| Max. RPM [Max | 3 |
| Relief Valve Setting | Flange |
| Shaft Type | 5/16 in |
| Cover End Flow @ RPM | 20 |
| Pilot Type | 42 gpm @ 1200 rpm |
| Port Size | 1 |
| Port Orientation - Cover End | 1.25 in |
| Pump Series | Straight w/ Key |
| Controlled Flow Rate | 63 gpm @ 1800 rpm |
| Shaft Seal Type | 45VQ |
| Shaft Dia. | 2.44 in |
| Cover End Pressure [Max | None |
| Minor Diameter [Min | 1 1/2 in Flange |
| Weight | Buna-N |
| Rotation | 2200 |
| Major Diameter [Max | 2500 psi |
| Pressure Port Size, Shaft End | 63 |
| Pressure Port Size, Cover End | A |
| Spline Description | SAE C, 2 Bolt |
| Cover End RPM [Max | Single Shaft Seal |
| Shaft End RPM [Max | Opposite Inlet Port |
| Manufacturer Part No. | 45VQ42A-1A20-LH |
| Mounting Flange | 8.5 |
| Model No. | w/o Integral Valves |
101-1026-009/101-1026 -AFT Hydraulic Orbit Motor Hidrolik BMPH80
Replace Poclain Torque Plunger Hydraulic Motor Rotor MSE05 for Concrete Mixer
Orbital Hydraulic Motor 103-1014-012/103-1014 bmrs250 Eaton Char-lynn hydraulikmotor
High Torque Low Speed 101-1024-009/101-1024 Hydraulic Motor BMPH400
Small Volume BMM32 Hydraulic Small Swing Motor For Roller
Excavator Hydraulic Gear Pump for 230 310 Pilot Pump