CAT Excavator Diesel Engine Water Thermostat 247-7133
Shaft Dia.: | 76.0 LB |
Spline Description: | Flange Mount |
Shaft Length: | Right Hand (CW) |
Cover End Flow @ RPM: | 3525VQ35A21-11DD20 |
Mounting: | 3 |
Integral Valve Configuration: | Flange |
Seal Material: | N/A |
Controlled Flow Rate: | Standard Pilot |
PDF |
|
Product Details
Shaft Dia. | 76.0 LB |
Spline Description | Flange Mount |
Shaft Length | Right Hand (CW) |
Cover End Flow @ RPM | 3525VQ35A21-11DD20 |
Mounting | 3 |
Integral Valve Configuration | Flange |
Seal Material | N/A |
Controlled Flow Rate | Standard Pilot |
Relief Valve Setting | 1.25 in |
Rotation | 14 Tooth Splined |
Pump Series | 3525VQ |
Shaft Type | 1.9375 in |
Port Type | Buna-N |
Shaft End RPM [Max | 2400 |
Port Orientation - Cover End | 1.04 in |
GPM @ 1,800 rpm, Cover End | SAE C, 2 Bolt |
Shaft End Flow @ RPM | Single Shaft Seal |
Port Orientation - Shaft End | 12/24 |
Major Diameter [Min | 2500 |
Model No. | 2400 |
Shaft Seal Type | N/A |
Port Size | 21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm |
Pressure Port Size, Cover End | 1.248 in |
GPM @ 1,800 rpm, Shaft End | 1.247 in |
Pressure Port Size, Shaft End | N/A |
Minor Diameter [Max | N/A |
Minor Diameter | N/A |
Pilot Type | 35 gal/min @ 1200 rpm, 52.5 gal/min @ 1800 rpm |
Mounting Flange | 3525VQ35A21-11DD20 |
Cover End RPM [Max | 3000 |
Cover End Pressure [Max | 3000 |
Max. RPM [Max | 31.5 |
Displacement Cover End (cu in/revolution) | 52.5 |
Minor Diameter [Min | w/o Integral Valves |
Shaft End Pressure [Max | Outlet 135° CW from Inlet |
Major Diameter [Max | Outlet 90° CW from Inlet |
Manufacturer Part No. | 1 in Flange |
Shaft Key | 1 1/4 in Flange |
Weight | 4.12 |
Displacement Shaft End (cu in/revolution) | 6.88 |