3.937 Inch | 100 Millimeter x 5.906 Inch | 150 Millimeter x 0.945 Inch | 24 Millimeter TIMKEN 3MMV9120HXVVSULFS934 Precision Ball Bearings
Question3.937 Inch | 100 Millimeter x 5.906 Inch | 150 Millimeter x 0.945 Inch | 24 Millimeter TIMKEN 3MMV9120HXVVSULFS934 Precision Ball Bearings ? BEARING SUDAMERICANA,S.A. Find what you need 3.937 Inch | 100 Millimeter x 5.906 Inch | 150 Millimeter x 0.945 Inch | 24 Millimeter faster by entering your Timken Bearing information .
What is 3MMV9120HXVVSULFS934 bearing cross reference?
Brand Name: | TIMKEN |
Model Number: | 3MMV9120HXVVSULFS934 |
Major Diameter [Max: | 30.0 LB |
Cover End Flow @ RPM: | Flange Mount |
Cover End Pressure [Max: | Right Hand (CW) |
Shaft Seal Type: | V2010-2F7S2S-1CC12 |
Port Type: | 1 1/2 |
GPM @ 1,800 rpm, Cover End: | Flange |
Max. RPM [Max: | 3/16 in |
Pressure Port Size, Cover End: | N/A |
Product Details
Major Diameter [Max | 30.0 LB |
Cover End Flow @ RPM | Flange Mount |
Cover End Pressure [Max | Right Hand (CW) |
Shaft Seal Type | V2010-2F7S2S-1CC12 |
Port Type | 1 1/2 |
GPM @ 1,800 rpm, Cover End | Flange |
Max. RPM [Max | 3/16 in |
Pressure Port Size, Cover End | N/A |
Rotation | 0.875 in |
Shaft End Pressure [Max | Straight w/ Key |
Model No. | V2010 |
Cover End RPM [Max | 2.3125 in |
Shaft End RPM [Max | Buna-N |
Port Size | 3000 |
Shaft Type | N/A |
Displacement Shaft End (cu in/revolution) | SAE B, 2 Bolt |
Controlled Flow Rate | Single Shaft Seal |
Shaft End Flow @ RPM | N/A |
Minor Diameter [Min | 3000 |
Seal Material | 3000 |
Manufacturer Part No. | N/A |
Mounting Flange | 2 gal/min @ 1200 rpm, 3 gal/min @ 1800 rpm |
Port Orientation - Shaft End | N/A |
Mounting | N/A |
Major Diameter [Min | N/A |
Pilot Type | N/A |
Displacement Cover End (cu in/revolution) | N/A |
GPM @ 1,800 rpm, Shaft End | 7 gal/min @ 1200 rpm, 10.5 gal/min @ 1800 rpm |
Minor Diameter | V2010-2F7S2S-1CC12 |
Weight | 2500 |
Minor Diameter [Max | 2500 |
Port Orientation - Cover End | 3 |
Pressure Port Size, Shaft End | 10.5 |
Pump Series | N/A |
Shaft Length | Outlet 45° CW from Inlet |
Spline Description | Outlet Inline w/Inlet |
Shaft Dia. | 1/2 in SAE O-Ring |
Relief Valve Setting | 3/4 in SAE O-Ring |
Shaft Key | 0.4 |
Integral Valve Configuration | 1.39 |