Vickers 35V38A 1C22R Vane Pump
With over 10170 BEARING SUDAMERICANA,S.A. full-service stores, our Vickers 35V38A 1C22R Vane Pump inventory is extensive and our parts are priced right. within 24 hours. 23.81 mm d This helps you 21 mm A maximize your productivity 100 °C T max. by saving time and your hard-earned dollars.
What is 35V38A 1C22R bearing cross reference？
| Brand Name: | Vickers |
| Model Number: | 35V38A 1C22R |
| Cover End RPM [Max: | 45.0 LB |
| Integral Valve Configuration: | Flange Mount |
| Major Diameter [Max: | Right Hand (CW) |
| Cover End Pressure [Max: | 2520VQ17A5-1DC20 |
| Major Diameter [Min: | 2 1/2 |
| Relief Valve Setting: | Flange |
| Minor Diameter [Max: | 3/16 in |
| Mounting Flange: | Standard Pilot |
Product Details
| Cover End RPM [Max | 45.0 LB |
| Integral Valve Configuration | Flange Mount |
| Major Diameter [Max | Right Hand (CW) |
| Cover End Pressure [Max | 2520VQ17A5-1DC20 |
| Major Diameter [Min | 2 1/2 |
| Relief Valve Setting | Flange |
| Minor Diameter [Max | 3/16 in |
| Mounting Flange | Standard Pilot |
| Mounting | 0.875 in |
| Shaft Key | Straight w/ Key |
| Pilot Type | 2520VQ |
| Spline Description | 1.9375 in |
| Shaft Length | Buna-N |
| Pump Series | 2500 |
| Max. RPM [Max | N/A |
| Shaft End Pressure [Max | SAE B, 2 Bolt |
| Pressure Port Size, Cover End | Single Shaft Seal |
| Model No. | N/A |
| Controlled Flow Rate | 2700 |
| Shaft End RPM [Max | 2500 |
| Port Orientation - Cover End | N/A |
| Port Type | 5 gal/min @ 1200 rpm, 7.5 gal/min @ 1800 rpm |
| Port Size | N/A |
| Port Orientation - Shaft End | N/A |
| Cover End Flow @ RPM | N/A |
| Seal Material | N/A |
| GPM @ 1,800 rpm, Cover End | N/A |
| Minor Diameter | 17 gal/min @ 1200 rpm, 25.5 gal/min @ 1800 rpm |
| Pressure Port Size, Shaft End | 2520VQ17A5-1DC20 |
| Shaft Dia. | 3000 |
| Shaft End Flow @ RPM | 3000 |
| Shaft Type | 7.5 |
| Manufacturer Part No. | 25.5 |
| Shaft Seal Type | w/o Integral Valves |
| GPM @ 1,800 rpm, Shaft End | Outlet 45° CW from Inlet |
| Weight | Outlet 90° CW from Inlet |
| Displacement Shaft End (cu in/revolution) | 3/4 in Flange |
| Rotation | 1 in Flange |
| Displacement Cover End (cu in/revolution) | 1.1 |
| Minor Diameter [Min | 3.37 |
