32013 4t-32013X Hr32013xj 32013jr E32013j 32013-X Tapered/Taper Roller Bearing for Reducer Automobile Construction Machinery Agricultural Machinery Transmission
How do I place BEARING SUDAMERICANA,S.A. an EMERGENCY order for a 32013 4t-32013X Hr32013xj 32013jr E32013j 32013-X Tapered/Taper Roller Bearing for Reducer Automobile Construction Machinery Agricultural Machinery Transmission that I Powder Coat finish/coating: want 1.3400 in base height: to pick up at a our store?
Model Number: |
32013 |
GPM @ 1,800 rpm, Cover End: |
76.0 LB |
Port Size: |
Flange Mount |
Shaft Length: |
Left Hand (CCW) |
Shaft Key: |
3525VQ38A21-1AD20LH |
Shaft Dia.: |
3 |
Port Orientation - Shaft End: |
Flange |
Mounting: |
5/16 in |
Cover End Flow @ RPM: |
Standard Pilot |
Product Details
GPM @ 1,800 rpm, Cover End |
76.0 LB |
Port Size |
Flange Mount |
Shaft Length |
Left Hand (CCW) |
Shaft Key |
3525VQ38A21-1AD20LH |
Shaft Dia. |
3 |
Port Orientation - Shaft End |
Flange |
Mounting |
5/16 in |
Cover End Flow @ RPM |
Standard Pilot |
Max. RPM [Max |
1.25 in |
Minor Diameter [Min |
Straight w/ Key |
Displacement Cover End (cu in/revolution) |
3525VQ |
Cover End RPM [Max |
2.5 in |
Port Type |
Buna-N |
Pump Series |
2400 |
Shaft Seal Type |
N/A |
Cover End Pressure [Max |
SAE C, 2 Bolt |
Manufacturer Part No. |
Single Shaft Seal |
Shaft End Flow @ RPM |
N/A |
Minor Diameter [Max |
2500 |
Controlled Flow Rate |
2400 |
Displacement Shaft End (cu in/revolution) |
N/A |
Spline Description |
21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm |
Model No. |
N/A |
Weight |
N/A |
Pilot Type |
N/A |
Mounting Flange |
N/A |
Rotation |
N/A |
Relief Valve Setting |
38 gal/min @ 1200 rpm, 57 gal/min @ 1800 rpm |
Major Diameter [Min |
3525VQ38A21-1AD20LH |
Minor Diameter |
3000 |
Pressure Port Size, Shaft End |
3000 |
Shaft End Pressure [Max |
31.5 |
Seal Material |
57 |
Shaft Type |
w/o Integral Valves |
Shaft End RPM [Max |
Outlet 135° CW from Inlet |
Integral Valve Configuration |
Outlet Opposite Inlet |
Port Orientation - Cover End |
1 in Flange |
GPM @ 1,800 rpm, Shaft End |
1 1/4 in Flange |
Major Diameter [Max |
4.12 |
Pressure Port Size, Cover End |
7.42 |