High Precision Taper Roller Bearings 32019, 32020, 32021, 32022, 32023, 32024, 32026, 32028, ABEC-1, ABEC-3
High Precision Taper Roller Bearings 32019, 32020, 32021, 32022, 32023, 32024, 32026, 32028, ABEC-1, ABEC-3, BEARING SUDAMERICANA,S.A. Units and Housings CAD models 4 Bolt Pillow Block; Long Description , 32026 Bearing Manufacturing Service . Get Your 0662288746683 EAN Free.
| Model Number: |
32019, |
| Relief Valve Setting: |
75.0 LB |
| Displacement Shaft End (cu in/revolution): |
Flange Mount |
| Shaft Dia.: |
Left Hand (CCW) |
| Displacement Cover End (cu in/revolution): |
3520VQ30E11-11CC20-LH |
| Manufacturer Part No.: |
3 |
| Shaft Type: |
Flange |
| GPM @ 1,800 rpm, Cover End: |
N/A |
| Pressure Port Size, Cover End: |
Standard Pilot |
Product Details
| Relief Valve Setting |
75.0 LB |
| Displacement Shaft End (cu in/revolution) |
Flange Mount |
| Shaft Dia. |
Left Hand (CCW) |
| Displacement Cover End (cu in/revolution) |
3520VQ30E11-11CC20-LH |
| Manufacturer Part No. |
3 |
| Shaft Type |
Flange |
| GPM @ 1,800 rpm, Cover End |
N/A |
| Pressure Port Size, Cover End |
Standard Pilot |
| Port Orientation - Shaft End |
1.25 in |
| Port Orientation - Cover End |
14 Tooth Splined |
| Max. RPM [Max |
3520VQ |
| Major Diameter [Max |
1 15/16 in |
| Integral Valve Configuration |
Buna-N |
| Weight |
2500 |
| Port Type |
1.04 in |
| Pump Series |
SAE C, 2 Bolt |
| Shaft End RPM [Max |
Single Shaft Seal |
| Shaft Seal Type |
12/24 |
| Mounting Flange |
2500 |
| Rotation |
2500 |
| Controlled Flow Rate |
N/A |
| Seal Material |
11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm |
| Minor Diameter |
1.248 in |
| Cover End Pressure [Max |
1.247 in |
| Spline Description |
N/A |
| Shaft Length |
N/A |
| Pressure Port Size, Shaft End |
N/A |
| Minor Diameter [Min |
30 gal/min @ 1200 rpm, 45 gal/min @ 1800 rpm |
| Cover End RPM [Max |
3520VQ30E11-11CC20-LH |
| Mounting |
3000 |
| Port Size |
3000 |
| Shaft End Pressure [Max |
16.5 |
| Cover End Flow @ RPM |
45 |
| Shaft Key |
w/o Integral Valves |
| Pilot Type |
Outlet 45° CW from Inlet |
| Shaft End Flow @ RPM |
Outlet Inline w/Inlet |
| Minor Diameter [Max |
1 1/16 in SAE O-Ring |
| Major Diameter [Min |
1 1/4 in Flange |
| Model No. |
2.22 |
| GPM @ 1,800 rpm, Shaft End |
5.96 |