Motorcycle Needle Roller Bearing HK1015 (HK0409 HK0508 HK0608 HK0609 HK0610 HK0708 HK0709 HK0712 HK0808 HK0810 HK0812 HK0914 HK0916 HK1010 HK1012 HK1014 HK1212)
How do I H320 Associated sleeve reference place an EMERGENCY order for a Motorcycle Needle Roller Bearing HK1015 (HK0409 HK0508 HK0608 HK0609 HK0610 HK0708 HK0709 HK0712 HK0808 HK0810 HK0812 HK0914 HK0916 HK1010 HK1012 HK1014 HK1212) BEARING SUDAMERICANA,S.A. that I want to pick up at a our store?
| Model Number: |
HK1015 |
| Mounting Flange: |
45.0 LB |
| Weight: |
Flange Mount |
| Shaft Dia.: |
Right Hand (CW) |
| GPM @ 1,800 rpm, Shaft End: |
2520VQ12A5-11DD20 |
| Port Type: |
2 1/2 |
| Cover End RPM [Max: |
Flange |
| Major Diameter [Min: |
N/A |
| Shaft Key: |
Standard Pilot |
Product Details
| Mounting Flange |
45.0 LB |
| Weight |
Flange Mount |
| Shaft Dia. |
Right Hand (CW) |
| GPM @ 1,800 rpm, Shaft End |
2520VQ12A5-11DD20 |
| Port Type |
2 1/2 |
| Cover End RPM [Max |
Flange |
| Major Diameter [Min |
N/A |
| Shaft Key |
Standard Pilot |
| Minor Diameter [Min |
0.875 in |
| Integral Valve Configuration |
13 Tooth Splined |
| Displacement Cover End (cu in/revolution) |
2520VQ |
| Model No. |
1 3/8 in |
| Displacement Shaft End (cu in/revolution) |
Buna-N |
| Manufacturer Part No. |
2700 |
| Cover End Flow @ RPM |
0.715 in |
| Shaft Length |
SAE B, 2 Bolt |
| Relief Valve Setting |
Single Shaft Seal |
| Pilot Type |
16/32 |
| Pump Series |
2700 |
| Controlled Flow Rate |
2700 |
| Mounting |
N/A |
| Minor Diameter |
5 gal/min @ 1200 rpm, 7.5 gal/min @ 1800 rpm |
| Shaft End RPM [Max |
0.873 in |
| Port Size |
0.872 in |
| Shaft Seal Type |
N/A |
| Shaft End Pressure [Max |
N/A |
| Rotation |
N/A |
| Shaft Type |
12 gal/min @ 1200 rpm, 18 gal/min @ 1800 rpm |
| Pressure Port Size, Cover End |
2520VQ12A5-11DD20 |
| GPM @ 1,800 rpm, Cover End |
3000 |
| Spline Description |
3000 |
| Max. RPM [Max |
7.5 |
| Shaft End Flow @ RPM |
18 |
| Port Orientation - Shaft End |
w/o Integral Valves |
| Cover End Pressure [Max |
Outlet 135° CW from Inlet |
| Port Orientation - Cover End |
Outlet 90° CW from Inlet |
| Pressure Port Size, Shaft End |
3/4 in Flange |
| Seal Material |
1 in Flange |
| Minor Diameter [Max |
1.1 |
| Major Diameter [Max |
2.45 |