QM INDUSTRIES QAF18A080SEN Flange Block Bearings
Can't find 14137AS Cone Part Number what you're looking for QM INDUSTRIES QAF18A080SEN Flange Block Bearings ? 39.62 mm da - Cone Frontface Backing Diameter Our expert BEARING SUDAMERICANA,S.A. QM INDUSTRIES Bearing Representatives be in contact with you shortly!
What is QAF18A080SEN bearing cross reference？
| Brand Name: |
QM INDUSTRIES |
| Model Number: |
QAF18A080SEN |
| Controlled Flow Rate: |
45.0 LB |
| Pressure Port Size, Shaft End: |
Flange Mount |
| Pilot Type: |
Left Hand (CCW) |
| Shaft Type: |
2520VQ21A14-11BC20-LH |
| Pressure Port Size, Cover End: |
2.5 |
| Shaft End RPM [Max: |
Flange |
| Minor Diameter [Min: |
N/A |
| Major Diameter [Min: |
Standard Pilot |
Product Details
| Controlled Flow Rate |
45.0 LB |
| Pressure Port Size, Shaft End |
Flange Mount |
| Pilot Type |
Left Hand (CCW) |
| Shaft Type |
2520VQ21A14-11BC20-LH |
| Pressure Port Size, Cover End |
2.5 |
| Shaft End RPM [Max |
Flange |
| Minor Diameter [Min |
N/A |
| Major Diameter [Min |
Standard Pilot |
| Shaft Key |
0.875 in |
| Port Size |
13 Tooth Splined |
| Major Diameter [Max |
2520VQ |
| Shaft End Pressure [Max |
1.375 in |
| Mounting |
Double |
| Seal Material |
Buna-N |
| Displacement Cover End (cu in/revolution) |
2500 |
| Port Orientation - Shaft End |
0.715 in |
| Displacement Shaft End (cu in/revolution) |
4.1 |
| Weight |
Single Shaft Seal |
| Port Type |
16/32 |
| GPM @ 1,800 rpm, Shaft End |
2700 |
| Shaft Length |
2500 |
| Max. RPM [Max |
N/A |
| Cover End Flow @ RPM |
14 gal/min @ 1200 rpm, 21 gal/min @ 1800 rpm |
| Integral Valve Configuration |
0.873 in |
| GPM @ 1,800 rpm, Cover End |
0.872 in |
| Cover End RPM [Max |
N/A |
| Manufacturer Part No. |
N/A |
| Pump Series |
N/A |
| Shaft Dia. |
21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm |
| Shaft End Flow @ RPM |
2520VQ21A14-11BC20-LH |
| Model No. |
2000 |
| Spline Description |
3000 |
| Relief Valve Setting |
21 |
| Minor Diameter [Max |
31.5 |
| Port Orientation - Cover End |
w/o Integral Valves |
| Minor Diameter |
Outlet 45° CW from Inlet |
| Shaft Seal Type |
Outlet 90° CCW from Inlet |
| Rotation |
3/4 in Flange |
| Cover End Pressure [Max |
1 in Flange |
| Mounting Flange |
2.8 |