6.938 Inch | 176.225 Millimeter x 8.43 Inch | 214.122 Millimeter x 7.5 Inch | 190.5 Millimeter QM INDUSTRIES QMPF34J615ST Pillow Block Bearings
What ZZ (Double Shield) Seals is BEARING SUDAMERICANA,S.A. 6.938 Inch | 176.225 Millimeter x 8.43 Inch | 214.122 Millimeter x 7.5 Inch | 190.5 Millimeter the best place to buy 6.938 Inch | 176.225 Millimeter x 8.43 Inch | 214.122 Millimeter x 7.5 Inch | 190.5 Millimeter QM INDUSTRIES QMPF34J615ST Pillow Block Bearings online? QM INDUSTRIES Bearing Manufacturing Service .
What is QMPF34J615ST bearing cross reference？
| Brand Name: |
QM INDUSTRIES |
| Model Number: |
QMPF34J615ST |
| GPM @ 1,800 rpm, Cover End: |
101.0 LB |
| Port Orientation - Shaft End: |
Flange Mount |
| Minor Diameter: |
Left Hand (CCW) |
| Max. RPM [Max: |
4525V50A17-86DC22L |
| Cover End Pressure [Max: |
3 1/2 |
| Shaft Type: |
Flange |
| Weight: |
3/8 in |
| Cover End RPM [Max: |
Standard Pilot |
Product Details
| GPM @ 1,800 rpm, Cover End |
101.0 LB |
| Port Orientation - Shaft End |
Flange Mount |
| Minor Diameter |
Left Hand (CCW) |
| Max. RPM [Max |
4525V50A17-86DC22L |
| Cover End Pressure [Max |
3 1/2 |
| Shaft Type |
Flange |
| Weight |
3/8 in |
| Cover End RPM [Max |
Standard Pilot |
| Shaft Dia. |
1.5 in |
| Manufacturer Part No. |
Straight w/ Key |
| Port Type |
4525V |
| Relief Valve Setting |
3 7/16 in |
| Pressure Port Size, Shaft End |
Buna-N |
| Rotation |
1800 |
| Pressure Port Size, Cover End |
N/A |
| Seal Material |
SAE C, 2 Bolt |
| Mounting Flange |
Single Shaft Seal |
| Minor Diameter [Min |
N/A |
| Port Size |
1800 |
| Shaft Key |
1800 |
| Displacement Shaft End (cu in/revolution) |
N/A |
| Displacement Cover End (cu in/revolution) |
17 gal/min @ 1200 rpm, 25.5 gal/min @ 1800 rpm |
| Cover End Flow @ RPM |
N/A |
| Spline Description |
N/A |
| Shaft Length |
N/A |
| Port Orientation - Cover End |
N/A |
| Shaft End Pressure [Max |
N/A |
| Mounting |
50 gal/min @ 1200 rpm, 75 gal/min @ 1800 rpm |
| Controlled Flow Rate |
4525V50A17-86DC22L |
| Shaft End RPM [Max |
2500 |
| Major Diameter [Max |
2500 |
| Shaft Seal Type |
25.5 |
| Pilot Type |
75 |
| Model No. |
N/A |
| Integral Valve Configuration |
Outlet 45° CW from Inlet |
| Shaft End Flow @ RPM |
Outlet 90° CW from Inlet |
| Major Diameter [Min |
1 in Code 61 |
| Pump Series |
1 1/2 in Code 61 |
| Minor Diameter [Max |
3.4 |
| GPM @ 1,800 rpm, Shaft End |
9.9 |