QM INDUSTRIES QAF18A307SEN Flange Block Bearings
Browse BEARING SUDAMERICANA,S.A. QM INDUSTRIES QAF18A307SEN Flange Block Bearings Categories in the 0.3 e - ISO Factor8 Manufacturers Online Free. 23800 lbf C90 - Dynamic Radial Rating (90 million revolutions)4 including QM INDUSTRIES Bearing.
What is QAF18A307SEN bearing interchange？
| Brand Name: |
QM INDUSTRIES |
| Model Number: |
QAF18A307SEN |
| Shaft End Pressure [Max: |
76.0 LB |
| Displacement Shaft End (cu in/revolution): |
7.4 |
| Major Diameter [Max: |
Right Hand (CW) |
| Pilot Type: |
3525VQ38A12-1AA20 |
| Shaft Length: |
3 |
| GPM @ 1,800 rpm, Cover End: |
Flange |
| Cover End Pressure [Max: |
5/16 in |
| Manufacturer Part No.: |
Standard Pilot |
Product Details
| Shaft End Pressure [Max |
76.0 LB |
| Displacement Shaft End (cu in/revolution) |
7.4 |
| Major Diameter [Max |
Right Hand (CW) |
| Pilot Type |
3525VQ38A12-1AA20 |
| Shaft Length |
3 |
| GPM @ 1,800 rpm, Cover End |
Flange |
| Cover End Pressure [Max |
5/16 in |
| Manufacturer Part No. |
Standard Pilot |
| Minor Diameter [Min |
1.25 in |
| Pressure Port Size, Cover End |
Straight w/ Key |
| Cover End RPM [Max |
3525VQ |
| Shaft Type |
2 1/2 in |
| Port Orientation - Cover End |
Double |
| Minor Diameter [Max |
Buna-N |
| GPM @ 1,800 rpm, Shaft End |
2400 |
| Spline Description |
N/A |
| Cover End Flow @ RPM |
SAE C, 2 Bolt |
| Displacement Cover End (cu in/revolution) |
Single Shaft Seal |
| Max. RPM [Max |
N/A |
| Controlled Flow Rate |
2500 |
| Shaft End RPM [Max |
2400 |
| Minor Diameter |
N/A |
| Integral Valve Configuration |
12 gal/min @ 1200 rpm, 18 gal/min @ 1800 rpm |
| Port Type |
N/A |
| Major Diameter [Min |
N/A |
| Port Size |
N/A |
| Seal Material |
N/A |
| Rotation |
N/A |
| Weight |
38 gal/min @ 1200 rpm, 57 gal/min @ 1800 rpm |
| Model No. |
3525VQ38A12-1AA20 |
| Pump Series |
3000 |
| Shaft Seal Type |
3000 |
| Shaft Dia. |
18 |
| Shaft Key |
57 |
| Shaft End Flow @ RPM |
w/o Integral Valves |
| Relief Valve Setting |
Outlet 135° CCW from Inlet |
| Mounting |
Outlet Opposite Inlet |
| Pressure Port Size, Shaft End |
1 in Flange |
| Port Orientation - Shaft End |
1 1/4 in Flange |
| Mounting Flange |
2.5 |