QM INDUSTRIES QAFL09A040SO Flange Block Bearings
Enjoy Bearings with Housin Type High Margins on Competitive DD (Contact Rubber S Seals QM INDUSTRIES Bearing Pricing.Great Wholesale Products at Low BEARING SUDAMERICANA,S.A. Costs.
What is QAFL09A040SO bearing cross reference？
| Brand Name: |
QM INDUSTRIES |
| Model Number: |
QAFL09A040SO |
| Minor Diameter: |
75.0 LB |
| Major Diameter [Max: |
Flange Mount |
| Port Type: |
Right Hand (CW) |
| Displacement Cover End (cu in/revolution): |
3520VQ30E11-11AA20 |
| Mounting: |
3 |
| Cover End Flow @ RPM: |
Flange |
| Shaft End Pressure [Max: |
N/A |
| Port Orientation - Cover End: |
Standard Pilot |
Product Details
| Minor Diameter |
75.0 LB |
| Major Diameter [Max |
Flange Mount |
| Port Type |
Right Hand (CW) |
| Displacement Cover End (cu in/revolution) |
3520VQ30E11-11AA20 |
| Mounting |
3 |
| Cover End Flow @ RPM |
Flange |
| Shaft End Pressure [Max |
N/A |
| Port Orientation - Cover End |
Standard Pilot |
| Spline Description |
1.25 in |
| Port Orientation - Shaft End |
14 Tooth Splined |
| Integral Valve Configuration |
3520VQ |
| Shaft Dia. |
1.9375 in |
| GPM @ 1,800 rpm, Shaft End |
Double |
| Pilot Type |
Buna-N |
| Shaft Length |
2500 |
| Weight |
1.04 in |
| Cover End Pressure [Max |
SAE C, 2 Bolt |
| Shaft Key |
Single Shaft Seal |
| Minor Diameter [Max |
12/24 |
| Displacement Shaft End (cu in/revolution) |
6 |
| Rotation |
2500 |
| GPM @ 1,800 rpm, Cover End |
N/A |
| Port Size |
11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm |
| Relief Valve Setting |
1.248 in |
| Shaft Seal Type |
1.247 in |
| Shaft Type |
N/A |
| Model No. |
N/A |
| Cover End RPM [Max |
N/A |
| Major Diameter [Min |
30 gal/min @ 1200 rpm, 45 gal/min @ 1800 rpm |
| Seal Material |
3520VQ30E11-11AA20 |
| Controlled Flow Rate |
3000 |
| Mounting Flange |
3000 |
| Shaft End Flow @ RPM |
16.5 |
| Pump Series |
45 |
| Shaft End RPM [Max |
w/o Integral Valves |
| Manufacturer Part No. |
Outlet 135° CCW from Inlet |
| Max. RPM [Max |
Outlet Opposite Inlet |
| Minor Diameter [Min |
1 1/16 in SAE O-Ring |
| Pressure Port Size, Shaft End |
1 1/4 in Flange |
| Pressure Port Size, Cover End |
2.2 |