2.25 Inch | 57.15 Millimeter x 3.15 Inch | 80 Millimeter x 2.75 Inch | 69.85 Millimeter QM INDUSTRIES QMSN11J204SEM Pillow Block Bearings
Browse 2.25 Inch | 57.15 Millimeter x 3.15 Inch | 80 Millimeter x 2.75 Inch | 69.85 Millimeter QM INDUSTRIES QMSN11J204SEM Pillow Block Bearings 2.25 Inch | 57.15 Millimeter x 3.15 Inch | 80 Millimeter x 2.75 Inch | 69.85 Millimeter Categories in the Manufacturers Online Free. BEARING SUDAMERICANA,S.A. including QM INDUSTRIES Bearing.
What is QMSN11J204SEM bearing interchange？
| Brand Name: |
QM INDUSTRIES |
| Model Number: |
QMSN11J204SEM |
| Model No.: |
101.0 LB |
| Integral Valve Configuration: |
Flange Mount |
| Shaft Type: |
Right Hand (CW) |
| Max. RPM [Max: |
4525VQ60A17-11BB20 |
| Minor Diameter [Max: |
3 1/2 |
| Seal Material: |
Flange |
| GPM @ 1,800 rpm, Cover End: |
N/A |
| Port Type: |
Standard Pilot |
Product Details
| Model No. |
101.0 LB |
| Integral Valve Configuration |
Flange Mount |
| Shaft Type |
Right Hand (CW) |
| Max. RPM [Max |
4525VQ60A17-11BB20 |
| Minor Diameter [Max |
3 1/2 |
| Seal Material |
Flange |
| GPM @ 1,800 rpm, Cover End |
N/A |
| Port Type |
Standard Pilot |
| Mounting Flange |
1.25 in |
| Minor Diameter [Min |
14 Tooth Splined |
| Shaft End Flow @ RPM |
4525VQ |
| Shaft End RPM [Max |
1.9375 in |
| Shaft Dia. |
Buna-N |
| Shaft Key |
2200 |
| GPM @ 1,800 rpm, Shaft End |
1.04 in |
| Major Diameter [Min |
SAE C, 2 Bolt |
| Port Orientation - Shaft End |
Single Shaft Seal |
| Displacement Cover End (cu in/revolution) |
12/24 |
| Cover End Flow @ RPM |
2200 |
| Weight |
2200 |
| Manufacturer Part No. |
N/A |
| Displacement Shaft End (cu in/revolution) |
17 gal/min @ 1200 rpm, 25.5 gal/min @ 1800 rpm |
| Pressure Port Size, Cover End |
1.248 in |
| Relief Valve Setting |
1.247 in |
| Shaft Length |
N/A |
| Mounting |
N/A |
| Shaft End Pressure [Max |
N/A |
| Pilot Type |
60 gal/min @ 1200 rpm, 90 gal/min @ 1800 rpm |
| Port Size |
4525VQ60A17-11BB20 |
| Port Orientation - Cover End |
3000 |
| Minor Diameter |
2500 |
| Pump Series |
25.5 |
| Rotation |
90 |
| Shaft Seal Type |
w/o Integral Valves |
| Cover End Pressure [Max |
Outlet 45° CCW from Inlet |
| Cover End RPM [Max |
Outlet 90° CCW from Inlet |
| Pressure Port Size, Shaft End |
1 in Flange |
| Spline Description |
1 1/2 in Flange |
| Major Diameter [Max |
3.37 |
| Controlled Flow Rate |
11.8 |