4.438 Inch | 112.725 Millimeter x 7.008 Inch | 178 Millimeter x 5.906 Inch | 150 Millimeter QM INDUSTRIES QVVSN26V407SEB Pillow Block Bearings
4.438 Inch | 112.725 Millimeter x 7.008 Inch | 178 Millimeter x 5.906 Inch | 150 Millimeter QM INDUSTRIES QVVSN26V407SEB Pillow Block Bearings 4.438 Inch | 112.725 Millimeter x 7.008 Inch | 178 Millimeter x 5.906 Inch | 150 Millimeter Needs Analysis , Bearings with Housin Type BEARING SUDAMERICANA,S.A. QM INDUSTRIES Bearing Manufacturing Service . Get Your Free.
What is QVVSN26V407SEB bearing interchange？
| Brand Name: |
QM INDUSTRIES |
| Model Number: |
QVVSN26V407SEB |
| Weight: |
45.0 LB |
| Shaft End RPM [Max: |
Flange Mount |
| Port Orientation - Shaft End: |
Right Hand (CW) |
| Cover End Flow @ RPM: |
2520VQ12A5-11DD20 |
| Mounting: |
2 1/2 |
| Controlled Flow Rate: |
Flange |
| Pilot Type: |
N/A |
| Shaft Type: |
Standard Pilot |
Product Details
| Weight |
45.0 LB |
| Shaft End RPM [Max |
Flange Mount |
| Port Orientation - Shaft End |
Right Hand (CW) |
| Cover End Flow @ RPM |
2520VQ12A5-11DD20 |
| Mounting |
2 1/2 |
| Controlled Flow Rate |
Flange |
| Pilot Type |
N/A |
| Shaft Type |
Standard Pilot |
| Minor Diameter [Max |
0.875 in |
| Mounting Flange |
13 Tooth Splined |
| Major Diameter [Max |
2520VQ |
| GPM @ 1,800 rpm, Cover End |
1 3/8 in |
| GPM @ 1,800 rpm, Shaft End |
Buna-N |
| Port Type |
2700 |
| Relief Valve Setting |
0.715 in |
| Manufacturer Part No. |
SAE B, 2 Bolt |
| Max. RPM [Max |
Single Shaft Seal |
| Spline Description |
16/32 |
| Cover End Pressure [Max |
2700 |
| Pump Series |
2700 |
| Port Orientation - Cover End |
N/A |
| Minor Diameter |
5 gal/min @ 1200 rpm, 7.5 gal/min @ 1800 rpm |
| Major Diameter [Min |
0.873 in |
| Displacement Shaft End (cu in/revolution) |
0.872 in |
| Shaft Seal Type |
N/A |
| Shaft End Flow @ RPM |
N/A |
| Displacement Cover End (cu in/revolution) |
N/A |
| Rotation |
12 gal/min @ 1200 rpm, 18 gal/min @ 1800 rpm |
| Cover End RPM [Max |
2520VQ12A5-11DD20 |
| Shaft Dia. |
3000 |
| Minor Diameter [Min |
3000 |
| Port Size |
7.5 |
| Model No. |
18 |
| Shaft Key |
w/o Integral Valves |
| Integral Valve Configuration |
Outlet 135° CW from Inlet |
| Seal Material |
Outlet 90° CW from Inlet |
| Shaft End Pressure [Max |
3/4 in Flange |
| Shaft Length |
1 in Flange |
| Pressure Port Size, Shaft End |
1.1 |
| Pressure Port Size, Cover End |
2.45 |