SEALMASTER MFC-218 Flange Block Bearings
SEALMASTER Bearing are a few 11.5 Nm Recommended tightening torque for set screw brands you will find in our M12 N inventory. Find SEALMASTER MFC-218 Flange Block Bearings to see what's in BEARING SUDAMERICANA,S.A. stock!
What is MFC-218 bearing interchange？
| Brand Name: |
SEALMASTER |
| Model Number: |
MFC-218 |
| Port Size: |
118.0 LB |
| Cover End Flow @ RPM: |
Flange Mount |
| Shaft End Flow @ RPM: |
Right Hand (CW) |
| Shaft Seal Type: |
4535VQ60A25-1DD20 |
| Shaft Dia.: |
4 |
| Seal Material: |
Flange |
| Port Type: |
5/16 in |
| Major Diameter [Min: |
Standard Pilot |
Product Details
| Port Size |
118.0 LB |
| Cover End Flow @ RPM |
Flange Mount |
| Shaft End Flow @ RPM |
Right Hand (CW) |
| Shaft Seal Type |
4535VQ60A25-1DD20 |
| Shaft Dia. |
4 |
| Seal Material |
Flange |
| Port Type |
5/16 in |
| Major Diameter [Min |
Standard Pilot |
| Cover End RPM [Max |
1.25 in |
| Shaft Type |
Straight w/ Key |
| Weight |
4535VQ |
| Mounting Flange |
1 15/16 in |
| Pump Series |
Buna-N |
| Shaft End Pressure [Max |
2200 |
| Mounting |
N/A |
| Displacement Cover End (cu in/revolution) |
SAE C, 2 Bolt |
| Spline Description |
Single Shaft Seal |
| GPM @ 1,800 rpm, Cover End |
N/A |
| Manufacturer Part No. |
2200 |
| Pilot Type |
2200 |
| Relief Valve Setting |
N/A |
| Shaft Length |
25 gal/min @ 1200 rpm, 37.5 gal/min @ 1800 rpm |
| Model No. |
N/A |
| Minor Diameter |
N/A |
| Port Orientation - Cover End |
N/A |
| Pressure Port Size, Cover End |
N/A |
| Minor Diameter [Max |
N/A |
| Controlled Flow Rate |
60 gal/min @ 1200 rpm, 90 gal/min @ 1800 rpm |
| Integral Valve Configuration |
4535VQ60A25-1DD20 |
| Pressure Port Size, Shaft End |
3000 |
| Major Diameter [Max |
2500 |
| GPM @ 1,800 rpm, Shaft End |
37.5 |
| Port Orientation - Shaft End |
90 |
| Rotation |
w/o Integral Valves |
| Shaft End RPM [Max |
Outlet 90° CW from Inlet |
| Max. RPM [Max |
Outlet 90° CW from Inlet |
| Displacement Shaft End (cu in/revolution) |
1 1/4 in Flange |
| Cover End Pressure [Max |
1 1/2 in Flange |
| Minor Diameter [Min |
4.98 |
| Shaft Key |
11.8 |