SEALMASTER SFT-35T Flange Block Bearings
How do I place an EMERGENCY order CN Radial clearance class for BEARING SUDAMERICANA,S.A. a SEALMASTER SFT-35T Flange Block Bearings 7.91 Hz Characteristic inner ring frequency, BPFI 3,800 rpm Nlim (grease) that I want to pick up at a our store?
What is SFT-35T bearing interchange？
| Brand Name: |
SEALMASTER |
| Model Number: |
SFT-35T |
| Controlled Flow Rate: |
45.0 LB |
| Shaft Seal Type: |
Flange Mount |
| Seal Material: |
Left Hand (CCW) |
| Mounting: |
2520VQ12A12-11CC20-LH |
| Shaft Dia.: |
2 1/2 |
| Pilot Type: |
Flange |
| Manufacturer Part No.: |
N/A |
| Port Orientation - Cover End: |
Standard Pilot |
Product Details
| Controlled Flow Rate |
45.0 LB |
| Shaft Seal Type |
Flange Mount |
| Seal Material |
Left Hand (CCW) |
| Mounting |
2520VQ12A12-11CC20-LH |
| Shaft Dia. |
2 1/2 |
| Pilot Type |
Flange |
| Manufacturer Part No. |
N/A |
| Port Orientation - Cover End |
Standard Pilot |
| Relief Valve Setting |
0.875 in |
| Port Type |
13 Tooth Splined |
| Displacement Cover End (cu in/revolution) |
2520VQ |
| Shaft Length |
1 3/8 in |
| Rotation |
Buna-N |
| Pressure Port Size, Cover End |
2700 |
| Cover End RPM [Max |
0.715 in |
| Cover End Pressure [Max |
SAE B, 2 Bolt |
| Minor Diameter [Min |
Single Shaft Seal |
| Integral Valve Configuration |
16/32 |
| Displacement Shaft End (cu in/revolution) |
2700 |
| Port Size |
2700 |
| GPM @ 1,800 rpm, Shaft End |
N/A |
| Major Diameter [Min |
12 gal/min @ 1200 rpm, 18 gal/min @ 1800 rpm |
| Weight |
0.873 in |
| Mounting Flange |
0.872 in |
| Minor Diameter |
N/A |
| Shaft Type |
N/A |
| Shaft End Pressure [Max |
N/A |
| Pressure Port Size, Shaft End |
12 gal/min @ 1200 rpm, 18 gal/min @ 1800 rpm |
| Major Diameter [Max |
2520VQ12A12-11CC20-LH |
| Shaft End RPM [Max |
2300 |
| Port Orientation - Shaft End |
3000 |
| Minor Diameter [Max |
18 |
| Shaft End Flow @ RPM |
18 |
| Model No. |
w/o Integral Valves |
| Spline Description |
Outlet 45° CW from Inlet |
| Max. RPM [Max |
Outlet Inline w/Inlet |
| Pump Series |
3/4 in Flange |
| Shaft Key |
1 in Flange |
| GPM @ 1,800 rpm, Cover End |
2.41 |
| Cover End Flow @ RPM |
2.45 |